Naslov
Optimization of a Subsea Pipeline Route Profile with the Elimination of Free Spans
(Optimization of a Subsea Pipeline Route Profile with the Elimination of Free Spans)

Autori
Ćatipović, Ivan ; Ušćumlić, Jadranka ; Ćustić, Lamia

Izvornik
Journal of pipeline systems engineering and practice (1949-1190) 10 (2019), 2; 04019007, 11

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Subsea steel pipeline ; Route profile optimization ; Pipeline curvature ; Contact load constraint ; Seabed reaction ; Elimination of free spans ; Euler-Bernoulli beam ; Quartic spline

Sažetak
The selected route for a subsea pipeline is usually uneven and requires extensive preparation. In the case of a relatively stiff pipeline, free spans that are too long may occur even on the prepared route (causing design issues like fatigue). To solve this problem, an optimization procedure has been developed to minimize route preparation costs and to eliminate free spans. The procedure is based on the Euler-Bernoulli beam and the quartic spline used for modeling the route profile in the vertical plane. The seabed is considered to be rigid and without friction. In the procedure, the contact load between the pipeline and the seabed is constrained. A minimum limit of contact load is set to ensure that the pipeline isin contact with the seabed forits whole length sothat free spans do not occur. The effectiveness ofthe procedure istested in a narrow sea channel with a relatively large diameter steel pipeline for oil transportation. Optimization results are compared with the static response obtained by the nonlinear finite element method (NFEM). The comparison shows that the use of a contact load constraint leads to a significant reduction or to the elimination of free spans.

Izvorni jezik
Engleski

Znanstvena područja
Brodogradnja

POVEZANOST RADA