Pregled bibliografske jedinice broj: 1048827
Characterization of surface layer obtained by boronizing of C45 steel
Characterization of surface layer obtained by boronizing of C45 steel // Proceedings of the International Youth Scientific and Technical Conference "Young science - robotics and nano-technology of modern mechanical engineering" / Kovalevskyy, S.V (ur.).
Kramatorsk: Donbass State Engineering Academy, 2019. str. 38-41 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
CROSBI ID: 1048827 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Characterization of surface layer obtained by boronizing of C45 steel
Autori
Nikšić, David ; Milinović, Andrijana ; Filipčić, Edita
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni
Izvornik
Proceedings of the International Youth Scientific and Technical Conference "Young science - robotics and nano-technology of modern mechanical engineering"
/ Kovalevskyy, S.V - Kramatorsk : Donbass State Engineering Academy, 2019, 38-41
ISBN
978-966-379-885-1
Skup
International Youth Scientific and Technical Conference Young science - robotics and nano-technology of modern mechanical engineering
Mjesto i datum
Kramatorsk, Ukrajina, 09.04.2019. - 10.04.2019
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Boronizing ; Thickness ; Volume share ; Hardness
Sažetak
This study deals with characterization of surface layers obtained by pack boronizing C45 steel at 870 °C for 6 h. Analysis is performed to assess average thickness, change of volume share of boride phase and the surface microhardness in the layer cross section. Thickness of obtained layer varies in range from 76 to 97 µm, with average value of 81 µm. As the hardness, results indicate that cross sectional changes of surface hardness strongly depends not only on hardnesses of base material and obtained borides, but on their volume share as well.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
