Pregled bibliografske jedinice broj: 1027231
Considerations relating to the behavior of steel alloys of similar industrial applications
Considerations relating to the behavior of steel alloys of similar industrial applications // The 9th International Conference on Physical and Numerical Simulation of Materials Processing (9th ICPNS)
Sankt Peterburg, Ruska Federacija; Moskva, Ruska Federacija, 2019. (plenarno, međunarodna recenzija, pp prezentacija, znanstveni)
CROSBI ID: 1027231 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Considerations relating to the behavior of steel
alloys of similar industrial applications
Autori
Brnić, Josip ; Brčić, Marino ; Kršćanski, Sanjin
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, pp prezentacija, znanstveni
Skup
The 9th International Conference on Physical and Numerical Simulation of Materials Processing (9th ICPNS)
Mjesto i datum
Sankt Peterburg, Ruska Federacija; Moskva, Ruska Federacija, 10.10.2019. - 14.10.2019
Vrsta sudjelovanja
Plenarno
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Mechanical behavior (and properties) ; Short-time creep ; Fatigue ; Different steel alloys ; Creep modeling ; Similar industrial applications
(Mechanical behavior (and properties) ; Short-time creep ; Fatigue ; Different steel alloys ; Creep modelingl, Similar industrial applications)
Sažetak
The selection of the material for a particular industrial purpose is made on the basis of knowledge of the material properties and material mechanical behavior under predictable conditions of exploitation. In this sense, the paper deals with the analysis of the mechanical behavior of several metallic materials exposed to different environmental conditions. Experimentally obtained data related to engineering stress-strain diagrams, creep behavior and fatigue of considered materials were analyzed. Experimentally obtained results of the research were drawn in graphic form. Temperature dependency of the material mechanical behavior is visible based on shown curves. For certain material data are listed in the order as follows: ultimate tensile strength (σ_m), yield strength (σ_(0.2)) and fatigue limit (σ_f) at stress ratio R. All data refers to room temperature and they are: 42CrMo4 [(735, 593) MPa, 532 MPa /R=0.25] ; 51CrV4 [(770, 642) MPa, 251 MPa / R=-1] ; 30CrNiMo8 [(696, 355) MPa, 280 MPa / R=-1] ; 18CrNi8 [(613, 458) MPa, 285 MPa / R=-1] ; X6CrNiTi18- 10 [(607, 390) MPa, 434 MPa / R=0.25] ; X46Cr13 [(782, 658) MPa, 682 MPa / R=0.25 ; 325 MPa / R=-1]. Data related to Charpy impact energy is also shown.
Izvorni jezik
Engleski
Znanstvena područja
Brodogradnja, Strojarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
NadSve-Sveučilište u Rijeci-UNIRI_TEHNIC-18-42 - Istraživanje, analiza i modeliranje ponašanja konstrukcijskih elemenata opterećenih pri sobnoj i povišenim temperaturama (Brnić, Josip, NadSve ) ( CroRIS)
Ustanove:
Tehnički fakultet, Rijeka
