Naslov
Study on strengthening during cold drawing of steel tubes

Autori
Jandrlić, Ivan ; Rešković, Stoja ; Tarandek, Patrik ; Slokar Benić, Ljerka ; Brlić, Tin

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of 9th International Conference Mechanical Technologies and Structural Materials 2019 / Jozić, Sonja ; Lela, Branimir - Split : Hrvatsko društvo za strojarske tehnologije, 2019, 83-88

Skup
9th International Conference: Mechanical Technologies and Structural Materials (MTSM 2019)

Mjesto i datum
Split, Hrvatska, 26.09.2019. - 27.09.2019

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Cold drawing, Steel tube, Strengthening, Low carbon steel, Deformation zone

Sažetak
A study on strengthening during cold drawing was carried out on the samples taken from the steel tube before and after the cold drawing on the drawing bench. Low carbon steel tubes were previously prepared and cold-drawn through the drawing dies with a different degree of reduction. During the process, the process is stopped and samples were taken in front of the deformation zone, in the zone itself and behind the deformation zone. Detailed measurements on changes in the hardness and microstructure in the deformation zone were performed. The effect of the degree of deformation on the strengthening of the tested steel during the cold drawing was determined.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija, Interdisciplinarne tehničke znanosti

POVEZANOST RADA