Pregled bibliografske jedinice broj: 1014398
Creep fatigue behaviour of directionally solidified nickel base super alloy
Creep fatigue behaviour of directionally solidified nickel base super alloy // Sažeci predavanja s 2. Međunarodnog simpozija hrvatskih metalurga, "Stanje i razvitak plastične obradbe kovina i slitina"
Split, Hrvatska: Hrvatsko metalurško društvo, 1996. str. 115-115 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1014398 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Creep fatigue behaviour of directionally solidified nickel base super alloy
Autori
Zrnik, J. ; Yu., Y. ; Wang, J. A. ; Žitnaksky, M. ; Mamuzić, Ilija ; Hornak, P.
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Sažeci predavanja s 2. Međunarodnog simpozija hrvatskih metalurga, "Stanje i razvitak plastične obradbe kovina i slitina"
/ - : Hrvatsko metalurško društvo, 1996, 115-115
Skup
2. Međunarodni simpozij hrvatskih metalurga, "Stanje i razvitak plastične obradbe kovina i slitina"
Mjesto i datum
Split, Hrvatska, 20.06.1996. - 22.06.1996
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
nickel ; superalloy ; static and cyclic creep ; times ; stress amplitude ; frequency
Sažetak
The static and cyclic load controlled tests of as-cast and treated single crystal nickel base superalloy CMSX3 have been studied. Two different testing procedures were adopted. One is cryclic test with different hold times at maximum stress amplitude, and the other cryclic creep procedure is in which the mean stress was held constant at 400 MPa. Different cycling frequency and amplitude ratios were superimposed on the mean stress. All the tests were carried out at 900 °C.The influence of these variables was evaluated through the deformation mechanism investigation and life to facture data.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
Napomena
Tiskano u: Metalurgija 35 (1996) 2, 115.
