Naslov
Wear resistance of steel X210Cr12 in conditions by oil lubrication

Autori
Pereglin, Luka ; Marušić, Vlatko ; Opačak, Ivan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the International Youth Scientific and Technical Conference “Youth science - robotization and nanotechnology of modern machine building” (YSET-2019) / Kovalevskyy, Sergiy - Kramatorsk : Donbass State Engineering Academy, 2019, 42-47

ISBN
978-966-379-885-1

Skup
International Youth Scientific and Technical Conference Young science - robotics and nano-technology of modern mechanical engineering

Mjesto i datum
Kramatorsk, Ukrajina, 09.04.2019. - 10.04.2019

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
steel X210Cr12 ; wear resistance ; lubrication ; hemp oil

Sažetak
In this paper the influence of hemp seed oil on the lubrication of two materials in sliding contact as well as the tribological effects of this oil was analyzed. Tribological examination was performed with help of the method by ball and flat disk on tribometer with alternating motion (eng. ball on flat). Material selected for the ball is AISI E52100 steel, while for the disk sample was selected X210Cr12 steel. The examinations were performed for three different oscillation frequencies: 10, 15 and 20 Hz, whereby for each frequency the loads of 10, 13, 16 and 19 N were changed in duration of 30 minutes for each examination, whereby the final result was shown by measuring the loss of sample mass. During examination, the oil showed a very good physico-chemical and tribological properties at higher loads and lower oscillation frequencies and can therefore be used as a lubricant in industrial applications.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA