Pregled bibliografske jedinice broj: 1003219
Uniaxial fatigue, creep and stress-strain responses of steel 30CrNiMo8
Uniaxial fatigue, creep and stress-strain responses of steel 30CrNiMo8 // Steel and composite structures, 31 (2019), 4; 409-416 doi:10.12989/scs.2019.31.4.409 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1003219 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Uniaxial fatigue, creep and stress-strain
responses of steel 30CrNiMo8
Autori
Brnić, Josip ; Brčić, Marino ; Kršćanski, Sanjin ; Lanc, Domagoj ; Chen, Sijie
Izvornik
Steel and composite structures (1229-9367) 31
(2019), 4;
409-416
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
steel 30CrNiMo8 ; fatigue ; creep ; mechanical properties ; Charpy impact energy
Sažetak
The choice of individual material for industrial application is primarily based on knowledge of its behavior in similar applications and similar environmental conditions. Contemporary design implies knowledge of material behavior and knowledge in the area of structural analysis supported by large capacity computers. Bearing this in mind, this paper presents and analyzes the experimental results related to the mechanical properties of the material considered (30CrNiMo8/1.6580/AISI 4340) at different temperatures as well as its creep and fatigue behavior. All experimental tests were carried out as uniaxial tests. The test results related to the mechanical properties are presented in the form of engineering stress-strain diagrams. The results related to the creep behavior of the material are shown in the form of creep curves, while the fatigue of the material is shown in the form of stress – life (S – N) diagram. Based on these experimental results, the values of the following properties are determined: ultimate tensile strength (σm, 20 = 696 MPa), yield strength (σ0.2, 20 = 355.5 MPa), modulus of elasticity (E, 20 = 217 GPa) and fatigue limit (σf, 20, R = 280.4 MPa). Results related to fatigue tests were obtained at room temperature and stress ratio R = -1.
Izvorni jezik
Engleski
Znanstvena područja
Brodogradnja, Strojarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
NadSve-Sveučilište u Rijeci-UNIRI_TEHNIC-18-42 - Istraživanje, analiza i modeliranje ponašanja konstrukcijskih elemenata opterećenih pri sobnoj i povišenim temperaturama (Brnić, Josip, NadSve ) ( CroRIS)
NadSve-Sveučilište u Rijeci-UNIRI_TEHNIC-18-200 - Analiza oštećenja materijala u morskom okolišu (FAMME) (Vukelić, Goran, NadSve ) ( CroRIS)
Ustanove:
Tehnički fakultet, Rijeka
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
Uključenost u ostale bibliografske baze podataka::
- Science Citation Index Expanded (SciSearch)
- SCOPUS
- ISI Alerting Services
- Current Contents/Engineering Computing & Technology
- Applied Mechanics Reviews
- ProQuest
- Metals Abstracts/META DEX
- Engineering
- Materials Abstracts
- Materials Business File-Steel Alerts.