Naslov
CFD Simulation of co-combustion of solid recovered fuel and coal in a cement calciner

Autori
Mikulčić, Hrvoje ; von Berg, Eberhard ; Vujanović, Milan ; Priesching, Peter ; Schneider, Daniel Rolph ; Duić, Neven

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, prošireni sažetak, znanstveni

Izvornik
SMARTCATs 2nd General Meeting & Workshop on Smart Energy Carriers in Industry - Book of Abstracts / Costa, Mario - Lisabon : Instituto Superior Tecnico & SMARTCATS COST Action CM1404, 2016, 123-124

Skup
SMARTCATs 2nd General Meeting & Workshop on Smart Energy Carriers in Industry

Mjesto i datum
Lisabon, Portugal, 14.11.2016. - 16.11.2016

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
CFD ; Co-combustion ; Solid Recovered Fuel ; Coal ; Calciner

Sažetak
Disposal of large quantities of waste has a negative effect on human health, quality of life and particularly on the environment. Due to the named negative effects the European Landfill directive (1999/31/EC), prohibits the disposal of untreated waste in landfills. Conse-quently, a variety of waste-to-energy technologies are the focus of many research and devel-opment activities. One of these waste-to– energy technologies is the thermal utilization of Sol-id Recovered Fuels – SRF. SRF is defined as solid fuels prepared from non-hazardous waste materials intended for firing in industrial furnaces. The thermal utilization of SRF, especially the co-combustion of SRF with coal is increasingly gaining on importance in cement industry. One possibility for the control and investigation of the co-combustion process are CFD simu-lations. Early comprehensive information, parametric studies and initial conclusions that can be gained from CFD simulations are very important in handling modern combustion units. The purpose of this poster is to present a CFD simulation of the co-combustion process in a cement calciner. Numerical models of pulverized coal and SRF combustion were developed and implemented into the commercial CFD code AVL FIRE®, which was then used for the investigation. This code was used to simulate turbulent flow field, interaction of particles with the gas phase, temperature field, and concentrations of the gaseous species and the reac-tion products, by solving the set of conservation equations for mass, momentum and enthalpy that govern these processes. A three dimensional geometry of a real industrial cement calciner was used for the CFD simulation. The results gained by this simulation can be used for the optimization of cement calciner’s operating conditions, and for the reducing of its pollutant emissions depending on coal-SRF ratio and composition of both fuels.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA