Pregled bibliografske jedinice broj: 979688
Toxicology of Pre-heated Composites Polymerized Directly and Through CAD/CAM Overlay
Toxicology of Pre-heated Composites Polymerized Directly and Through CAD/CAM Overlay // Acta stomatologica Croatica, 52 (2018), 3; 203-217 doi:10.15644/asc52/3/4 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 979688 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Toxicology of Pre-heated Composites Polymerized Directly and Through CAD/CAM Overlay
(Toxicity of Pre-heated Composites Polymerized Directly and Through CAD/CAM Overlay)
Autori
Knežević, Alena ; Želježić, Davor ; Kopjar, Nevenka ; Duarte Jr., Sillas ; Par, Matej ; Tarle, Zrinka
Izvornik
Acta stomatologica Croatica (0001-7019) 52
(2018), 3;
203-217
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
cytotoxicity ; genotoxicity ; pre-heated composite
Sažetak
Objectives: The aim was to compare cytotoxicity/genotoxicity of pre-heated composites polymerized through CAD/CAM overlays on isolated human peripheral blood lymphocytes. Material and Methods: A microhybrid (Z100, 3M ESPE) and nanofilled composite (Filtek Supreme Ultra, 3M ESPE) were heated in a heating unit (Calset, AdDent Inc.) at different temperatures: 37 oC, 54 oC, and 68 oC. A small amount of heated composite was placed in a cylindrical mold (6mm diameter ; 0.65mm thick), covered with a Mylar sheet, pressed and light-cured directly and through 2 mm thick CAD/ CAM ceramic-reinforced polymer (CRP)(LAVA Ultimate, 3M ESPE) or CAD/CAM lithium disilicate ceramic (LDC)(e.max, Ivoclar/Vivadent) overlay. After curing, the specimens were immediately placed in a prepared lymphocyte cell culture. Cytotoxicity was assessed using a dye exclusion method by simultaneous staining with ethidium bromide and acridine orange, aimed to determine percentages of viable, apoptotic and necrotic cells. Genotoxicity was studied using alkaline comet assay. Results: For Z100, the highest percentage of viable cells is recorded at T1 (93.7%) after direct light curing, followed by light curing through CRP (92.3%) and through LDC (91.7%T1, T3). For Filtek Supreme Ultra, the highest percentage of viable cells is recorded while curing through CRP (91.0% T2), followed by LDC (90% T1, T3) and direct light curing (88.7%T2). Conclusion: For both tested materials, preheating the procedure at T1 and T2 may be the procedure of choice. In terms of genotoxicity, preheating at T3 may not be suggested.
Izvorni jezik
Engleski
Znanstvena područja
Dentalna medicina
POVEZANOST RADA
Ustanove:
Stomatološki fakultet, Zagreb
Profili:
Davor Želježić
(autor)
Zrinka Tarle
(autor)
Matej Par
(autor)
Nevenka Kopjar
(autor)
Alena Knežević
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Emerging Sources Citation Index (ESCI)
- Scopus