Pretraga

Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 975151

Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios

(RSNA Special Interest Group for 3D Printing) Chepelev, Leonid; Wake, Nicole; Ryan, Justin; Althobaity, Waleed; Gupta, Ashish; Arribas, Elsa; Santiago, Lumarie; Ballard, David H; Wang, Kenneth C; Weadock, William et al.
Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios // 3D Printing in Medicine, 4 (2018), 11, 77 doi:10.1186/s41205-018-0030-y (međunarodna recenzija, članak, znanstveni)

CROSBI ID: 975151 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios

Autori
Chepelev, Leonid ; Wake, Nicole ; Ryan, Justin ; Althobaity, Waleed ; Gupta, Ashish ; Arribas, Elsa ; Santiago, Lumarie ; Ballard, David H ; Wang, Kenneth C ; Weadock, William ; Ionita, Ciprian N ; Mitsouras, Dimitrios ; Morris, Jonathan ; Matsumoto, Jane ; Christensen, Andy ; Liacouras, Peter ; Rybicki, Frank J ; Sheikh, Adnan ; Kopačin, Vjekoslav

Kolaboracija
RSNA Special Interest Group for 3D Printing

Izvornik
3D Printing in Medicine (2365-6271) 4 (2018); 11, 77

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
3D printing ; Appropriateness ; Guideline ; Quality ; Radiology ; Additive manufacturing ; Anatomic mode

Sažetak
Medical three-dimensional (3D) printing has expanded dramatically over the past three decades with growth in both facility adoption and the variety of medical applications. Consideration for each step required to create accurate 3D printed models from medical imaging data impacts patient care and management. In this paper, a writing group representing the Radiological Society of North America Special Interest Group on 3D Printing (SIG) provides recommendations that have been vetted and voted on by the SIG active membership. This body of work includes appropriate clinical use of anatomic models 3D printed for diagnostic use in the care of patients with specific medical conditions. The recommendations provide guidance for approaches and tools in medical 3D printing, from image acquisition, segmentation of the desired anatomy intended for 3D printing, creation of a 3D-printable model, and post- processing of 3D printed anatomic models for patient care.

Izvorni jezik
Engleski

Znanstvena područja
Kliničke medicinske znanosti

Napomena
Kopačin Vjekoslav je koautor u sklopu RSNA 3D Printing Special Interest Group



POVEZANOST RADA

Ustanove:
Klinički bolnički centar Osijek

Profili:

Avatar Url Vjekoslav Kopačin (autor)

Poveznice na cjeloviti tekst rada:

doi threedmedprint.biomedcentral.com doi.org

Citiraj ovu publikaciju:

(RSNA Special Interest Group for 3D Printing) Chepelev, Leonid; Wake, Nicole; Ryan, Justin; Althobaity, Waleed; Gupta, Ashish; Arribas, Elsa; Santiago, Lumarie; Ballard, David H; Wang, Kenneth C; Weadock, William et al.
Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios // 3D Printing in Medicine, 4 (2018), 11, 77 doi:10.1186/s41205-018-0030-y (međunarodna recenzija, članak, znanstveni)
(RSNA Special Interest Group for 3D Printing) (RSNA Special Interest Group for 3D Printing) Chepelev, L., Wake, N., Ryan, J., Althobaity, W., Gupta, A., Arribas, E., Santiago, L., Ballard, D., Wang, K. & Weadock, W. (2018) Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios. 3D Printing in Medicine, 4, 11, 77 doi:10.1186/s41205-018-0030-y.
@article{article, author = {Chepelev, Leonid and Wake, Nicole and Ryan, Justin and Althobaity, Waleed and Gupta, Ashish and Arribas, Elsa and Santiago, Lumarie and Ballard, David H and Wang, Kenneth C and Weadock, William and Ionita, Ciprian N and Mitsouras, Dimitrios and Morris, Jonathan and Matsumoto, Jane and Christensen, Andy and Liacouras, Peter and Rybicki, Frank J and Sheikh, Adnan and Kopa\v{c}in, Vjekoslav}, year = {2018}, pages = {77}, DOI = {10.1186/s41205-018-0030-y}, chapter = {11}, keywords = {3D printing, Appropriateness, Guideline, Quality, Radiology, Additive manufacturing, Anatomic mode}, journal = {3D Printing in Medicine}, doi = {10.1186/s41205-018-0030-y}, volume = {4}, issn = {2365-6271}, title = {Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios}, keyword = {3D printing, Appropriateness, Guideline, Quality, Radiology, Additive manufacturing, Anatomic mode}, chapternumber = {11} }
@article{article, author = {Chepelev, Leonid and Wake, Nicole and Ryan, Justin and Althobaity, Waleed and Gupta, Ashish and Arribas, Elsa and Santiago, Lumarie and Ballard, David H and Wang, Kenneth C and Weadock, William and Ionita, Ciprian N and Mitsouras, Dimitrios and Morris, Jonathan and Matsumoto, Jane and Christensen, Andy and Liacouras, Peter and Rybicki, Frank J and Sheikh, Adnan and Kopa\v{c}in, Vjekoslav}, year = {2018}, pages = {77}, DOI = {10.1186/s41205-018-0030-y}, chapter = {11}, keywords = {3D printing, Appropriateness, Guideline, Quality, Radiology, Additive manufacturing, Anatomic mode}, journal = {3D Printing in Medicine}, doi = {10.1186/s41205-018-0030-y}, volume = {4}, issn = {2365-6271}, title = {Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios}, keyword = {3D printing, Appropriateness, Guideline, Quality, Radiology, Additive manufacturing, Anatomic mode}, chapternumber = {11} }

Časopis indeksira:


  • Scopus

Citati:

    Altmetrijski pokazatelji:


    Podijeli:





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font
    CROSBI koristi kolačiće (cookies) kako bi poboljšao funkcionalnost stranice.