Naslov
I2S-LWR pressure vessel fluence calculations using SCALE6.1.3 code package

Autori
Matijevic, Mario ; Petrovic, Bojan

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, ostalo, znanstveni

Skup
2nd SCALE Users' Group Workshop

Mjesto i datum
Oak Ridge (TN), Sjedinjene Američke Države, 27.08.2018. - 29.08.2018

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
I2S-LWR, PWR, pressure vessel, neutron fluence, SCALE6.1.3, shielding, MAVRIC, Monte Carlo

Sažetak
The I2S-LWR (Integral Inherently Safe Light Water Reactor) is a high-power 1000 MWe reactor with improved inherent (passive) safety features. This new reactor concept, led by Georgia Institute of Technology, USA, is based on the integral primary circuit configuration, a new type of the fuel/cladding system, and a novel steam generation system. This work presents shielding studies of the I2S-LWR reactor model using the SCALE6.1.3 code package to identify the fast neutron fluence rate distribution. The reactor pressure vessel fast fluence calculation with uniform fission source showed that the results are conservative and below proposed upper limit. The SCALE6.1.3/MAVRIC shielding sequence was used to optimize neutron fluence inside the complete RPV for energies E>0.1 MeV, E>1.0 MeV and for the complete neutron spectra. The FW-CADIS method, based on multigroup forward-adjoint discrete ordinates solver Denovo, was used to accelerate the final Monte Carlo calculation with Monaco code. Such hybrid shielding methodology with mesh-based variance reduction parameters is very efficient for complex shielding problems with large computational domains. The same shielding methodology was used in the second part of the paper, where we calculated the radial neutron reflector heating and RPV power-level monitor's feasibility.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika

POVEZANOST RADA