Naslov
Analysis of membrane pore blocking model of ceramic and polymer ultrafiltration membranes for textile dyeing wastewater treatment

Autori
Somogyi, Viola ; Zebić Avdičević, Maja ; Harasztiné Hargitai, Réka ; Domokos, Endre ; Ljubas, Davor ; Dobrović, Slaven

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Digital proceedings, 3rd South East European Conference on Sustainable Development of Energy, Water and Environment System / Ban, Marko ; Duić, Neven ; Batas Bjelić, Ilija ; Rajaković, Nikola ; Schneider, Daniel Rolph ; Guzović, Zvonimir ; Costa, Mário ; Klemeš, Jiří Jaromír ; Sabev Varbanov, Petar ; Petranović, Zvonimir ; Ragossnig, Arne M. ; Schlör, Holger ; Venghaus, Sandra ; Vujanović, Milan - Zagreb : Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2018, 0072-1

Skup
3rd South East European Conference on Sustainable Development of Energy, Water and Environment System Conference (SEE SDEWES 2018)

Mjesto i datum
Novi Sad, Srbija, 30.06.2018. - 04.07.2018

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Membrane filtration, pore blocking model, ceramic membrane, polyethersulphone membrane, ultrafiltration, textile dyeing, wastewater treatment

Sažetak
Textile industry effluent is a complicated blend of chemicals in varying amount and quality persistent to environmental effects. Membrane technology is considered as an adequate option for textile wastewater reclamation and treatment because it can selectively exclude contaminants from wastewater. Today, polymeric membranes are the most commercially used but ceramic membranes have several advantages over polymeric membranes such as thermal, chemical and mechanical stability. The main disadvantage of membranes in general is fouling which causes decrease in membrane performance. Thus it is important to predict the filtration performance of membranes in order to avoid irreversible damage and to allow the direct reuse of permeate in the manufacturing process. The aim of this work is to develop a membrane separation model for ultrafiltration based on experiments carried out with two commercial membranes: tubular multichannel ceramic membrane 1 kDa and polymer polyethersulphone flat sheet 1 kDa membrane.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo, Temeljne tehničke znanosti, Interdisciplinarne tehničke znanosti

POVEZANOST RADA