Pregled bibliografske jedinice broj: 954640
Thermal fatigue of H11 steel in high pressure die casting conditions
Thermal fatigue of H11 steel in high pressure die casting conditions // Proceedings of the 19th International Colloquium on Mechanical Fatigue of Metals / DE JESUS, Abílio Manuel Pinho (ur.).
Porto: Faculdade de Engenharia, 2018. str. 281-282 (ostalo, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 954640 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Thermal fatigue of H11 steel in high pressure die casting conditions
Autori
Dadić, Zvonimir ; Živković, Dražen ; Čatipović, Nikša ; Marinić-Kragić, Ivo
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Proceedings of the 19th International Colloquium on Mechanical Fatigue of Metals
/ DE JESUS, Abílio Manuel Pinho - Porto : Faculdade de Engenharia, 2018, 281-282
ISBN
978-972-752-237-8
Skup
XIX International Colloquium on Mechanical Fatigue of Metals
Mjesto i datum
Porto, Portugal, 05.09.2018. - 07.09.2018
Vrsta sudjelovanja
Ostalo
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
tribology ; thermal fatigue ; high pressure die casting ; preheating temperature
Sažetak
Results shown in this paper were acquired by the prototype laboratory die casting testing equipment. This paper is a part of experimental research in area of high pressure die casting (HPDC) mould wear (H11). The laboratory equipment was designed to achieve similar conditions to die casting process. The main goal was to analyze tribological wear mechanisms of a die casting mould such as: thermal fatigue, erosion and adhesion wear. Testing parameters were set to simulate con-ditions in HPDC of aluminium alloy. Results for thermal fatigue wear of the mould material are presented for three samples. Samples were tested under same parameters for 10000 testing cycles, except with significantly different preheating temperature. Results are shown graphically by 3D scan before and after the ex-periment. The wear was also determined by mass loss of the tested samples.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
HRZZ-IP-2013-11-5371 - Optimiranje i modeliranje termalnih procesa materijala (OMOTPOM) (Smoljan, Božo, HRZZ - 2013-11) ( CroRIS)
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split
Profili:
Nikša Čatipović
(autor)
Dražen Živković
(autor)
Ivo Marinić-Kragić
(autor)
Zvonimir Dadić
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Scopus