Pregled bibliografske jedinice broj: 922559
Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition
Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition // Surface & coatings technology, 333 (2018), 81-86 doi:10.1016/j.surfcoat.2017.10.067 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 922559 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Prevention of spontaneous combustion of cellulose with a thin protective Al2O3 coating formed by atomic layer deposition
Autori
Omerzu, Aleš ; Šarić, Iva ; Kavre Piltaver, Ivna ; Petravica, Mladen ; Kapun, Tea ; Zule, Janja ; Štifter, Sanja ; Salamon, Krešimir
Izvornik
Surface & coatings technology (0257-8972) 333
(2018);
81-86
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Cellulose ; Atomic layer deposition ; Al2O3 Coating ; Combustion
(Cellulose ; Atomic layer deposition ; Al2O3 ; Coating ; Combustion)
Sažetak
We have studied properties of thin protective coating layers of Al2O3, grown by atomic layer deposition (ALD) technique on surfaces of cellulose fibrous materials, using scanning electron microscopy (SEM), scanning transmission microscopy (STEM), energy dispersive x-ray spectroscopy (EDS), high- resolution transmission microscopy (HR-TEM), x- ray diffraction (XRD) and thermal gravimetry (TGA). A minimum thickness of about 50 nm was required to completely inhibit oxygen diffusion into the material and prevent self-ignition at elevated temperatures. No substantial differences were found in morphology or protection performance of Al2O3 coatings produced by thermal or plasma-enhanced ALD (PEALD) methods. However, PEALD technique has shown almost a double growth rate, while, at the same time, it was successfully applied at temperatures as low as 40 °C without degrading quality of the coating.
Izvorni jezik
Engleski
Znanstvena područja
Fizika
POVEZANOST RADA
Ustanove:
Medicinski fakultet, Rijeka,
Institut "Ruđer Bošković", Zagreb,
Sveučilište u Rijeci - Odjel za fiziku
Profili:
Sanja Štifter
(autor)
Iva Šarić
(autor)
Ivna Kavre Piltaver
(autor)
Aleš Omerzu
(autor)
Krešimir Salamon
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
Uključenost u ostale bibliografske baze podataka::
- CA Search (Chemical Abstracts)
- Fluidex (Fluid Engineering Abstracts)
- Engineering Index
- FIZ Karlsruhe
- Fluid Abstracts
- Metal Finishing Abstracts
- Metals Abstracts
- PACambridge Scientific Abstracts
- Physics Abstracts
- Physikalische Berichte
- SCAL/CNRS
- Solid State Abstracts