Pregled bibliografske jedinice broj: 893695
Influence of the salt bath agitation and austempering temperature on the microstructure of austempered ductile iron
Influence of the salt bath agitation and austempering temperature on the microstructure of austempered ductile iron // 7th International Conference "Mechanical Technologies and Structural Materials 2017" / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2017. str. 17-22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 893695 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of the salt bath agitation and austempering temperature on the microstructure of austempered ductile iron
Autori
Čatipović, Nikša ; Živković, Dražen ; Dadić, Zvonimir ; Viceić, Marin
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
7th International Conference "Mechanical Technologies and Structural Materials 2017"
/ Jozić, Sonja ; Lela, Branimir - Split : Hrvatsko društvo za strojarske tehnologije, 2017, 17-22
Skup
7th International Conference "Mechanical Technologies and Structural Materials 2017"
Mjesto i datum
Split, Hrvatska, 21.09.2017. - 22.09.2017
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
austempered ductile iron ; microstructure ; salt bath ; agitation
Sažetak
In this paper the influence of austempering temperature and salt bath agitation on the final microstructure of the ferritic ductile iron has been studied. 17 samples have been subjected to different process parameters. Different microstructures have been recorded upon the completion of the tests. From the obtained micro images, it is obvious that both the austempering temperature and salt bath agitation affect the final microstructure of the austempered ductile iron. Lower austempering temperatures and salt bath agitation produce more ausferrite in the microstructure hence the harder and tougher phases are present. It is expected to be confirmed through further research of the mechanical properties tests of heat-treated samples.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
Napomena
Rad je izrađen u sklopu projekta "Optimization and modeling of thermal processes of materials" financiranog od strane Hrvatske zaklade za znanost, pod vodstvom prof.dr.sc. Bože Smoljana.
POVEZANOST RADA
Projekti:
HRZZ-IP-2013-11-5371 - Optimiranje i modeliranje termalnih procesa materijala (OMOTPOM) (Smoljan, Božo, HRZZ - 2013-11) ( CroRIS)
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split