Pregled bibliografske jedinice broj: 882331
An analysis of properties of electroless Ni-P layer on stainless steel
An analysis of properties of electroless Ni-P layer on stainless steel // Proceedings of the ESSC & DUPLEX 2017, 9th European Stainless Steel Conference - Science & Market & 5th European Duplex Stainless Steel Conference & Exhibition
Bergamo, Italija, 2017. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 882331 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
An analysis of properties of electroless Ni-P
layer on stainless steel
Autori
Smoljan, Božo ; Iljkić, Dario ; Maretić, Mauro ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the ESSC & DUPLEX 2017, 9th European Stainless Steel Conference - Science & Market & 5th European Duplex Stainless Steel Conference & Exhibition
/ - , 2017, 1-6
Skup
ESSC & DUPLEX 2017, 9th European Stainless Steel Conference - Science & Market & 5th European Duplex Stainless Steel Conference & Exhibition
Mjesto i datum
Bergamo, Italija, 25.05.2017. - 27.05.2017
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Electroless, Deposition, Coatings, Heat Treatment, Stainless Steel
Sažetak
Properties of electroless deposited nickel - phosphorous coatings on austenitic stainless steel were studied. The electroless Ni-P layer has been deposited on stainless steel AISI 316 as substrate. Nickel - phosphorous coatings was deposited without nickel strike pre-coating treatment. Study has been focused on influence of heat treatment on adhesivity, microhardness and microstructure analysis of electroless Ni-P coatings. Adhesivity was estimated by Vickers indenter. Microhardness was tested by using scanning electron microscope. Microstructure of the electroless treated specimens were analyzed by optical and scanning electron microscopy. Based on experimental results, it can be concluded that heat treated electroless nickel - phosphorous coatings on austenitic stainless steel have higher adhesivity and microhardness than non-heat treated electroless nickel - phosphorous coatings.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti, Interdisciplinarne tehničke znanosti
POVEZANOST RADA
Projekti:
13.09.1.1.02
HRZZ-IP-2013-11-5371 - Optimiranje i modeliranje termalnih procesa materijala (OMOTPOM) (Smoljan, Božo, HRZZ - 2013-11) ( CroRIS)
Ustanove:
Tehnički fakultet, Rijeka
Profili:
Andrej Borić
(autor)
Dario Iljkić
(autor)
Lovro Štic
(autor)
Božo Smoljan
(autor)
Sunčana Smokvina Hanza
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Scopus