Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 882272

An application of Jominy test results in computer simulations of steel quenching


Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Štic, Lovro; Borić, Andrej; Rubeša, Domagoj; Novak, Hrvoje
An application of Jominy test results in computer simulations of steel quenching // ICIT&APT 2017 : 10th International Conference on Industrial Tools and Advanced Processing Technologies - conference proceedings / Hančić, Aleš ; Grum, Janez (ur.).
Celje: TECOS Slovenian Tool and Die Development Centre, 2017. str. 1-1 (predavanje, međunarodna recenzija, sažetak, znanstveni)


CROSBI ID: 882272 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
An application of Jominy test results in computer simulations of steel quenching

Autori
Smoljan, Božo ; Iljkić, Dario ; Smokvina Hanza, Sunčana ; Štic, Lovro ; Borić, Andrej ; Rubeša, Domagoj ; Novak, Hrvoje

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
ICIT&APT 2017 : 10th International Conference on Industrial Tools and Advanced Processing Technologies - conference proceedings / Hančić, Aleš ; Grum, Janez - Celje : TECOS Slovenian Tool and Die Development Centre, 2017, 1-1

ISBN
978-961-6692-04-5

Skup
10th International Conference on Industrial Tools and Advanced Processing Technologies, ICIT&APT 2017

Mjesto i datum
Ljubljana, Slovenija, 24.04.2017. - 26.04.2017

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
quenching ; computer simulation ; hardness ; high-hardenability steels

Sažetak
An application of Jominy test results in computer simulations of hardness and microstructure distribution in quenched steel specimen was studied. Hardness at different workpiece points can be estimated by the conversion of the cooling time t8/5 to the hardness. This conversion can be provided by the relation between the cooling time t8/5 and distance from the quenched end of the Jominy specimen (Fig. 1) [2]. To accept the assumption, that the equality of times of cooling t8/5 of several specimens, indicates equality in hardness of that specimens, the history of cooling of these specimens must be the same or similar, i.e. their cooling curves must be similar (Fig. 2). In many cases of quenching of steel this principle is not satisfied. In the developed numerical model, prediction of quenching results at specimen points are based on the equivalent cooling time from 800 to 500 ºC, t8/5e [1, 2]. Equivalent cooling time t8/5e is function of cooling time, t8/5 and history of cooling. In this way, prediction of as-quenched hardness was improved by using the equivalent cooling time t8/5e [4]. Since original Jominy test gives the cooling times t8/5 up to a maximum of 200 s (Fig. 1), the original Jominy test is not suitable for prediction of hardness of high-hardenability steel workpieces. The modified Jominy test (JMC) was designed for high-hardenability steels, i.e. steels for tools and dies [3]. In Fig. 3 the characteristic cooling curves of cylindrical specimen quenched in oil are compared to the cooling curves in different locations of JMC specimen. The cooling curves in Fig. 3 are enough similar to encourage the application of the JMC specimen in the estimation of hardness of quenched high- hardenability steel workpieces. Developed numerical model for computer simulation of quenching was also experimentally verified. Limitations of proposed numerical model were found out as well. Proposed numerical model can be successfully applied in computer simulation of quenching of tools and dies made of high- hardenability steel.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti



POVEZANOST RADA


Projekti:
IP-2013-11-5371 - Optimiranje i modeliranje termalnih procesa materijala (OMOTPOM) (Smoljan, Božo, HRZZ - 2013-11) ( CroRIS)
13.09.1.1.02

Ustanove:
Tehnički fakultet, Rijeka


Citiraj ovu publikaciju:

Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Štic, Lovro; Borić, Andrej; Rubeša, Domagoj; Novak, Hrvoje
An application of Jominy test results in computer simulations of steel quenching // ICIT&APT 2017 : 10th International Conference on Industrial Tools and Advanced Processing Technologies - conference proceedings / Hančić, Aleš ; Grum, Janez (ur.).
Celje: TECOS Slovenian Tool and Die Development Centre, 2017. str. 1-1 (predavanje, međunarodna recenzija, sažetak, znanstveni)
Smoljan, B., Iljkić, D., Smokvina Hanza, S., Štic, L., Borić, A., Rubeša, D. & Novak, H. (2017) An application of Jominy test results in computer simulations of steel quenching. U: Hančić, A. & Grum, J. (ur.)ICIT&APT 2017 : 10th International Conference on Industrial Tools and Advanced Processing Technologies - conference proceedings.
@article{article, author = {Smoljan, Bo\v{z}o and Iljki\'{c}, Dario and Smokvina Hanza, Sun\v{c}ana and \v{S}tic, Lovro and Bori\'{c}, Andrej and Rube\v{s}a, Domagoj and Novak, Hrvoje}, year = {2017}, pages = {1-1}, keywords = {quenching, computer simulation, hardness, high-hardenability steels}, isbn = {978-961-6692-04-5}, title = {An application of Jominy test results in computer simulations of steel quenching}, keyword = {quenching, computer simulation, hardness, high-hardenability steels}, publisher = {TECOS Slovenian Tool and Die Development Centre}, publisherplace = {Ljubljana, Slovenija} }
@article{article, author = {Smoljan, Bo\v{z}o and Iljki\'{c}, Dario and Smokvina Hanza, Sun\v{c}ana and \v{S}tic, Lovro and Bori\'{c}, Andrej and Rube\v{s}a, Domagoj and Novak, Hrvoje}, year = {2017}, pages = {1-1}, keywords = {quenching, computer simulation, hardness, high-hardenability steels}, isbn = {978-961-6692-04-5}, title = {An application of Jominy test results in computer simulations of steel quenching}, keyword = {quenching, computer simulation, hardness, high-hardenability steels}, publisher = {TECOS Slovenian Tool and Die Development Centre}, publisherplace = {Ljubljana, Slovenija} }




Contrast
Increase Font
Decrease Font
Dyslexic Font