Pregled bibliografske jedinice broj: 873352
Analysis of the Pit Removal Methods in Digital Terrain Models of Various Resolutions
Analysis of the Pit Removal Methods in Digital Terrain Models of Various Resolutions // The international archives of the photogrammetry, remote sensing and spatial information sciences, 41 (2016), B2; 235-239 doi:10.5194/isprsarchives-XLI-B2-235-2016 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 873352 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Analysis of the Pit Removal Methods in Digital Terrain Models of Various Resolutions
Autori
Šamanović, Sanja ; Medak, Damir ; Gajski, Dubravko
Izvornik
The international archives of the photogrammetry, remote sensing and spatial information sciences (1682-1750) 41
(2016), B2;
235-239
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Pit removal ; DTM ; photogrammetry ; carving method ; filling method ; geomorphometry ; hydrology
Sažetak
Digital terrain model (DTM) is the base for calculation of the surface runoff under the influence of the gravity (gravity flow) in hydrological analysis. It is important to produce hydrologically corrected DTM with the removed natural and artificial depressions to avoid numerical problems in algorithms of the gravity flow. The pit removal procedure changes geomorphometry of the DTM. GIS software packages use pit removal algorithm independently of geomorphmetric features of the analyzed area. In need of minimally modified DTM after the pit removal areas, the carving method (deepen drainage routes) and the filling method (fill sink) were analyzed on three different geomorphometric areas (bare mountain range, hilly wooded area and the plain area intersected with the network of the drainage canals). The recommendation is given for the choice of geomorphometric least changing DTM algorithm. The input data are raster data of elevation points created by stereoscopic photogrammetry method in 5x5 and 25x25 meter resolution. Differences have been noticed during the process of creating raster data. The recommendation is given for the choice of the most acceptable method for each type of area on the basis of comparison of the original elevation points with the elevation points in created DTM.
Izvorni jezik
Engleski
Znanstvena područja
Geologija
Napomena
Conference: 23rd Congress of the International-Society-for-Photogrammetry-and-Remote-Sensing (ISPRS)
POVEZANOST RADA
Ustanove:
Geodetski fakultet, Zagreb
Poveznice na cjeloviti tekst rada:
Pristup cjelovitom tekstu rada doi
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- SCI-EXP, SSCI i/ili A&HCI