Naslov
Electromechanical characterization of piezoceramic elements around resonance frequencies at high excitation levels and different thermodynamic conditions

Autori
Petošić, Antonio ; Horvat, Marko ; Budimir, Marko ; Pavlović, Nikola ; Rojac, Tadej ; Malič, Barbara ; Drnovšek, Silvio

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
2016 Joint IEEE International Symposium on the Applications of Ferroelectrics, European Conference on Application of Polar Dielectrics, and Piezoelectric Force Microscopy Workshop (ISAF/ECAPD/PFM) / - : Institute of Electrical and Electronics Engineers (IEEE), 2016, 1-4

Skup
2016 Joint IEEE International Symposium on the Applications of Ferroelectrics, European Conference on Application of Polar Dielectrics, and Piezoelectric Force Microscopy Workshop (ISAF/ECAPD/PFM)

Mjesto i datum
Darmstadt, Njemačka, 21.08.2016. - 25.08.2016

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
electromechanical characterization ; linear and nonlinear driving conditions at different temperatures ; tracking the resonant frequency
(electromechanical characterization ; linear and nonlinear driving conditions at different temperatures ; tracking the resonant frequency. I)

Sažetak
Electromechanical characterization of piezoceramic bulk elements around resonance is usually done with low-level continuous excitation signals at room temperature, but in real applications such elements are driven with different types of electrical signals, usually at higher levels and at different ambient temperatures. Both homemade and commercial soft and hard PZT piezoceramic elements were characterized using the established characterization methods that include the measurements of electrical admittance and surface displacement of the piezoceramic elements around the series resonance frequencies of two modes of vibration (radial and thickness extensional). The measurements included fast frequency sweeps at constant voltage excitation levels, burst measurements, at different temperatures and at different levels of excitation. A novel method for electromechanical characterization of piezoceramic elements that utilizes the resonance frequency tracking at different excitation levels (electric fields up to 5 kV/m, currents up to 1.3 A at resonance) and temperature conditions (up to 150 °C) has been proposed. The main idea is to keep the investigated element in resonance as the excitation level changes by constant tracking of its resonance frequency. The electromechanical parameters of the considered elements change mostly due to the nonlinear effects and the changes due to different thermodynamic conditions can be neglected when fast algorithm is applied. The decrease of the input electrical admittance magnitude is more expressed than the change of the resonance frequency when algorithm is applied

Izvorni jezik
Engleski

Znanstvena područja
Fizika, Elektrotehnika

POVEZANOST RADA