Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 840294

Analysis of the influence of 3D printing on hardness of parts


Pavlic, Tomislav; Čikić, Ante; Golubić, Stjepan
Analysis of the influence of 3D printing on hardness of parts // Tehnički vjesnik, 23 (2016), 3; 843-847 (podatak o recenziji nije dostupan, izvorni znanstveni članak, znanstveni)


CROSBI ID: 840294 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Analysis of the influence of 3D printing on hardness of parts

Autori
Pavlic, Tomislav ; Čikić, Ante ; Golubić, Stjepan

Izvornik
Tehnički vjesnik (1330-3651) 23 (2016), 3; 843-847

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, izvorni znanstveni članak, znanstveni

Ključne riječi
3D print ; ABS ; deflection ; infill

Sažetak
The principles of additive production are such that they enable the making of very complex product geometry. The hardness of printed parts is not increased proportionally to the increase of the infill of the parts themselves. Different ways of printing have a bigger impact on the hardness than the infill. The research conducted on the "solid" model samples established sufficient hardness of parts gained from 3D printing with less material use and shorter time of production due to correct selection of parameters and the way of printing

Izvorni jezik
Engleski



POVEZANOST RADA


Ustanove:
Veleučilište u Bjelovaru

Profili:

Avatar Url Stjepan Golubić (autor)

Avatar Url Tomislav Pavlic (autor)

Avatar Url Ante Čikić (autor)

Poveznice na cjeloviti tekst rada:

Hrčak

Citiraj ovu publikaciju:

Pavlic, Tomislav; Čikić, Ante; Golubić, Stjepan
Analysis of the influence of 3D printing on hardness of parts // Tehnički vjesnik, 23 (2016), 3; 843-847 (podatak o recenziji nije dostupan, izvorni znanstveni članak, znanstveni)
Pavlic, T., Čikić, A. & Golubić, S. (2016) Analysis of the influence of 3D printing on hardness of parts. Tehnički vjesnik, 23 (3), 843-847.
@article{article, author = {Pavlic, Tomislav and \v{C}iki\'{c}, Ante and Golubi\'{c}, Stjepan}, year = {2016}, pages = {843-847}, keywords = {3D print, ABS, deflection, infill}, journal = {Tehni\v{c}ki vjesnik}, volume = {23}, number = {3}, issn = {1330-3651}, title = {Analysis of the influence of 3D printing on hardness of parts}, keyword = {3D print, ABS, deflection, infill} }
@article{article, author = {Pavlic, Tomislav and \v{C}iki\'{c}, Ante and Golubi\'{c}, Stjepan}, year = {2016}, pages = {843-847}, keywords = {3D print, ABS, deflection, infill}, journal = {Tehni\v{c}ki vjesnik}, volume = {23}, number = {3}, issn = {1330-3651}, title = {Analysis of the influence of 3D printing on hardness of parts}, keyword = {3D print, ABS, deflection, infill} }

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus





Contrast
Increase Font
Decrease Font
Dyslexic Font