Pregled bibliografske jedinice broj: 82052
GISAXS study of defects in deuterium implanted monocrystalline silicon
GISAXS study of defects in deuterium implanted monocrystalline silicon // SAS 2002 XII International Conference on Small-Angle Scattering, Conference Book / Carsughi Flavio; Spinozzi, Francesco (ur.).
Venecija, 2002. (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 82052 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
GISAXS study of defects in deuterium implanted monocrystalline silicon
Autori
Dubček, Pavo ; Pivac, Branko ; Bernstorff, Sigrid ; Corni, Federico ; Tonini, Rita ; Ottaviani, Gianpiero
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
SAS 2002 XII International Conference on Small-Angle Scattering, Conference Book
/ Carsughi Flavio; Spinozzi, Francesco - Venecija, 2002
Skup
XII International Conference on Small-Angle Scattering,
Mjesto i datum
Venecija, Italija, 25.08.2002. - 29.08.2002
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
silicon; deuterium; ion implantation; SAXS
Sažetak
Grazing incidence small angle X-ray scattering was used to study monocrystalline silicon samples implanted with deuterium ions at an energy of 24 keV and to the dose of 2 × 1016 ions/cm2. Samples were annealed isochronally at different temperatures in the range from 373 to 973 K. Due to the relaxation of the defects structures, i.e. redistribution of vacancies and deuterium, strong particle like contribution is observed in addition to the rough surface scattering, already at 373 K annealing. During the annealing, this particles (agglomerations of vacancies) are gradually dissolved till 623 K annealing temperature. Another agglomeration mechanism takes over at about 773 K when a different type of particle growth is observed, and these are dissolved again at about 973 K. The sizes of detected particles are in 2-3 nm range. Also, the interference type of scattering from a film of about 30 nm thickness (the top layer, mostly unaffected by implantation)is observed. This film is gradually getting thinner with the increasing annealing temperature, due to the redistribution of the defects and the structure relaxation.
Izvorni jezik
Engleski
Znanstvena područja
Fizika