Naslov
Razvoj i testiranje pet-osnog postprocesora
(Development and Testing of Five-Axis Postprocessors)

Autori
Mihoci, Kristijan ; Pavlic, Tomislav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the CIM 2009-12th International Scientific Conference on Production Engineering / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir - Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 2009, 1-6

ISBN
978-953-7689-03-2

Skup
12th International Scientific Conference on Production Engineering

Mjesto i datum
Biograd na Moru, Hrvatska, 17.06.2009. - 20.06.2009

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
pet-osni postprocesor ; CAD-CAM sistemi ; pet-osna obrada
(five-axis postprocessor ; CAD-CAM systems ; five-axis machining)

Sažetak
Five-axis machining has been developed with development of five-axis machines with modern control units. Programming of five-axis machines is complex, and manual programming almost has no sense. Thus, today programmers for this kind of job uses very often CAD-CAM systems. Last link for good functioning between CAD-CAM system and machine is postprocessor. In this work is shown development and testing of two postprocessors for five-axis machines. One postprocessor is for machine with 3 simultaneous axis, and positioning in fourth and fifth axis. Another one is developed for simultaneous work in all five axis. Testing has been done on exact examples from practice. Because of extra possibilities on control units, postprocessors are need to be updated to new versions.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA