Pregled bibliografske jedinice broj: 756881
The Development of Flickermeter According to Standard IEC61000-4-15 and Modeling Consumers Which Produce Flickers in the Power Network
The Development of Flickermeter According to Standard IEC61000-4-15 and Modeling Consumers Which Produce Flickers in the Power Network // Symposium on Power Electronics, Electrical Drives, Automation and Motion
Sorrento, Italija, 2012. str. 1012-1016 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 756881 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Development of Flickermeter According to Standard IEC61000-4-15 and Modeling Consumers Which Produce Flickers in the Power Network
Autori
Bečirović, Vedad ; Nikolić, Bojan ; Turković, Irfan ; Pavić, Ivica
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Symposium on Power Electronics, Electrical Drives, Automation and Motion
/ - , 2012, 1012-1016
ISBN
978-1-4673-1300-1
Skup
2012 INTERNATIONAL SYMPOSIUM ON Power Electronics, Electrical Drives, Automation and Motion
Mjesto i datum
Sorrento, Italija, 20.06.2012. - 22.06.2012
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
power quality; flicker; flickermeter; flicker definition; testing flickermeter; example of flicker measurements; flicker simulation example.
Sažetak
In this paper are defined procedures for a flicker measurement according to standard IEC 61000-4-15 and the definition of a flicker is given. The software for measuring a flicker severity was developed and this software was implemented on concrete example. The developed software is based on digital signal processing. Input data is a certain file or data from the computer’s RAM memory and the result is a value of the flicker severity. This concept allows that the developed software can be used both for the flicker measurements and for a simulation of flickers in the power network. A hardware support for the software can be any acquisition card which satisfies minimum conditions concerning the flicker measurement and a range of input signal. The aim of this work was to develop a universal application that can beb used for the flicker measurement and also for the flicker analysis which can be made after simulations in the power network. In this paper is made a model of characteristic consumer which produces flickers in the power network. The conclusions in this paper relate to the procedures of development of a flickermeter and to the example that is analyzed in this work.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb
Profili:
Ivica Pavić
(autor)
