Pregled bibliografske jedinice broj: 755788
Woven Fabric Faults Caused during the Weaving Process
Woven Fabric Faults Caused during the Weaving Process // IITAS 2014 / / Kumbasar, A. et al (ur.) (ur.).
Izmir: University Faculty of Engineering Department of Textile Engineering,, 2014. str. 169-172 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 755788 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Woven Fabric Faults Caused during the Weaving Process
Autori
Kocijančić, Šnidarić, Đurđica ; Kovačević, Stana ; Režek-Wilson, Nina
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
IITAS 2014 /
/ Kumbasar, A. et al (ur.) - Izmir : University Faculty of Engineering Department of Textile Engineering,, 2014, 169-172
Skup
IITAS 2014, Antalya Turska, XIII. International Textile and Apparel Symposium, Ege University, Engineering Faculty, Department of Textile Engineering
Mjesto i datum
İzmir, Turska, 02.04.2014. - 05.04.2014
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
fabric quality ; fabric fault ; types of faults ; fault systematization ; waste textiles
Sažetak
Fabric faults reduce fabric quality. This is the reason why such fabrics are only partially used for the purpose for which it has been woven. Due to high demands on material quality, it is necessary to separate them during cutting which is the reason for making the production more expensive. They are often the cause of quality reduction ; therefore, they are considered more and more unusable or as waste material. The conceptual framework of the research of this paper was the analysis of unusable fabrics caused by a fault during weaving. In order to protect environment and because of difficulties in waste disposal, recycling of fabrics made of various raw materials, the cause of fault formation in the fabric during the technological process and the way how to avoid them was investigated. A part of unusable fabrics came from the industry and it was impossible to make use of them or to recycle. The most frequent faults during weaving were investigated in this work. Yarn faults and technical errors were investigated as well as the cause of formation and consequences. Work procedure and control were proposed in order to prevent their emergence and to reduce their frequency.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA