Pregled bibliografske jedinice broj: 71380
Low-Sensitivity, Low-Power Fourth-Order Band-Pass Active-RC Allpole Filter Using Impedance Tapering
Low-Sensitivity, Low-Power Fourth-Order Band-Pass Active-RC Allpole Filter Using Impedance Tapering // Proceedings of The 8th International IEEE Conference on Electronics, Circuits, and Systems, Vol. II / Micallef,Joseph;Maloberti,Franco (ur.).
Imsida, Malta: Institute of Electrical and Electronics Engineers (IEEE), 2001. str. 815-818 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 71380 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Low-Sensitivity, Low-Power Fourth-Order Band-Pass Active-RC Allpole Filter Using Impedance Tapering
Autori
Jurišić, Dražen ; Moschytz, George S. ; Mijat, Neven
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of The 8th International IEEE Conference on Electronics, Circuits, and Systems, Vol. II
/ Micallef,Joseph;Maloberti,Franco - : Institute of Electrical and Electronics Engineers (IEEE), 2001, 815-818
Skup
8th International IEEE Conference on Electronics, Circuits, and Systems
Mjesto i datum
Imsida, Malta, 02.09.2001. - 05.09.2001
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Allpole filters; BP filters; LP-BP transformation; low-sensitivity active filters
Sažetak
In this paper the design of low sensitivity band-pass (BP) active resistance-capacitance (RC) filters using impedance tapering is presented. 4th-order band-pass filters are considered. The design procedure for low-sensitivity low-pass (LP) prototype second-order class 4 Sallen and Key active-RC allpole filters, using impedance tapering, has already been published. In this paper a low-pass to band-pass (LP-BP) transformation is applied to an impedance tapered 2nd-order LP filter, and a 4th-order BP filter is constructed. The component values, selected for impedance tapering, account for the considerable decrease in sensitivity to component tolerances for the LP as well as for the BP filter. As an example, a Chebyshev 4th-order BP filter is realized, and the sensitivities are analysed. Schoeffler sensitivity measure is used as a basis for comparison, and Monte Carlo runs are performed as a double-check. A considerable improvement in sensitivity is achieved, both for the BP filter as well as well as for the original LP prototype.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika