Pregled bibliografske jedinice broj: 70295
Modification of the surface properties of Ti by explosion of laser-plasma containing Coulomb particles
Modification of the surface properties of Ti by explosion of laser-plasma containing Coulomb particles // Vacuum, 47 (1996), 3; 255-263 doi:10.1016/0042-207X(95)00219-7 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 70295 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Modification of the surface properties of Ti by explosion of laser-plasma containing Coulomb particles
Autori
Lugomer, Stjepan ; Furić, Krešimir ; Bitelli, G. ; Stipančić, Mladen ; Stubičar, Mirko ; Gamulin, Ozren
Izvornik
Vacuum (0042-207X) 47
(1996), 3;
255-263
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Ti surface ; modification of surface properties ; laser-material interaction ; laser-plasma containing Coulomb particles ; Vickers microhardness ; X-ray diffraction ; Raman backscattering
Sažetak
This paper continues the study of the effects on a Ti surface caused by the explosion of a laser-plasma containing Coulomb particles. (Generation of such a system and particle self-organization in laser-material interaction(L-M I), was described in: S-Lugomer and G. Bitelli, Vacuum, 47, 13 (1996). The laser-plasma explosion in an O2 atmosphere, and the characteristic surface morphology by accelerated Coulomb particles, was reported in S. Lugomer and G. Bitelli, Vacuum, 47, 271 (1996)). Modification of the surface properties of titanium by the Coulomb particles in the exploding plasma was studied by Vickers microhardness tests, X-ray diffraction and Raman backscattering. A large jump of microhardness from the background value of 288 Kp/mm2 to about 700-1200 Kp/mm2 was observed at the places of glassy Ti-oxide ; the jump is smaller (to about 450-700 Kp/mm2) on the other oxidized zones. Finally, a decrease of microhardness on the pure Ti-surface occurs, because of plasma thermal effects (annihilation of dislocations in the surface zone). Raman backscattering studies have shown the existence of a partially crystalline Ti-oxide and also an amorphous (glassy) one. The contribution of the crystalline phases, anatase and the rutile (the low- and the high-temperature phases), changes with the number of laser pulses, i.e. the low-temperature phase is transferred into the high-temperature one, by repetitive laser pulsing. The broad backscattering band (Bose peak) was interpreted on the basis of the fraction model using the Yakubo's relation for fitting the real spectra. The phonon-fracton crossover frequency (omega) was found to be sensitive to the O2 pressure for P less then 5 atm, and quite insensitive for P equal or larger then 5 atm. Correlation of the results of Raman backscattering and the X-ray diffraction, indicates that the laser plasma explosion in O2 generates the glassy matrix of Ti-oxide , into which the crystallites of TiO2 (the anatase and the rutile phases, of size ranging from less then 10 A to tens of nm) are embedded.
Izvorni jezik
Engleski
Znanstvena područja
Fizika, Kemija
POVEZANOST RADA
Ustanove:
Institut "Ruđer Bošković", Zagreb,
Medicinski fakultet, Zagreb,
Prirodoslovno-matematički fakultet, Zagreb,
Fakultet elektrotehnike, računarstva i informacijskih tehnologija Osijek
Profili:
Mladen Stipančić
(autor)
Ozren Gamulin
(autor)
Mirko Stubičar
(autor)
Stjepan Lugomer
(autor)
Krešimir Furić
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
Uključenost u ostale bibliografske baze podataka::
- The INSPEC Science Abstracts series