Pregled bibliografske jedinice broj: 691317
Impedance as a measure of setting reaction in glass ionomer cements
Impedance as a measure of setting reaction in glass ionomer cements // Journal of non-crystalline solids, 389 (2014), 93-103 doi:10.1016/j.jnoncrysol.2014.02.012 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 691317 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Impedance as a measure of setting reaction in glass ionomer cements
Autori
Moguš-Milanković, Andrea ; Sklepić, Kristina ; Čalogović, Marina ; Marciuš, Marijan ; Prskalo, Katica ; Janković, Bernard ; Tarle, Zrinka
Izvornik
Journal of non-crystalline solids (0022-3093) 389
(2014);
93-103
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
dental cements; impedance spectroscopy; electrical conductivity; capacitance
Sažetak
The setting process for dental glass ionomer cements (GIC) was studied by impedance spectroscopy in a fixed, 10 and 1000 Hz, and wide frequency region, from 0.01 Hz to 1 MHz. For comparison, the setting of the conventional GICs, Fuji IX Fast and Ketac Molar Aplicap, and “resin modified” GIC, Fuji II LC, were investigated. The effect of setting upon electrical conductivity shows a significant decrease and break in conductivity for conventional GICs after the first 15 and 30 minutes, respectively. For light-activated Fuji II LC, only a drop without any evidence of a break in electrical conductivity was observed. Such behavior is the result of the instantaneous photopolymerization and formation of a rather homogeneous cement matrix. The complex impedance plots obtained for the three GICs studied show the presence of features that are attributed to the structural regions in the samples. Evolution of the impedance spectra and changes in the capacitance values reveal gradual transformations related to the development of various constituent regions during the setting process. Thus, impedance spectroscopy could become an essential technique for the separation of the overall electrical properties into their component parts, which could then serve as the foundations for meaningful clinical impedance measurements in vitro and in vivo. The knowledge of the sequences of the setting reactions in dental cements is important as these will affect the handling and the overall physical properties of the cements.
Izvorni jezik
Engleski
Znanstvena područja
Kemija
POVEZANOST RADA
Projekti:
098-0982904-2952 - Sinteza i mikrostruktura metalnih oksida i oksidnih stakala (Ristić, Mira, MZOS ) ( CroRIS)
098-0982929-2916 - Utjecaj strukture na električna svojstva (bioaktivnih) stakala i keramike (Moguš-Milanković, Andrea, MZOS ) ( CroRIS)
065-0352851-0410 - Nanostruktura restaurativnih materijala i interakcije s tvrdim zubnim tkivima (Tarle, Zrinka, MZOS ) ( CroRIS)
Ustanove:
Stomatološki fakultet, Zagreb,
Institut "Ruđer Bošković", Zagreb
Profili:
Zrinka Tarle
(autor)
Kristina Sklepić Kerhač
(autor)
Marijan Marciuš
(autor)
Andrea Moguš-Milanković
(autor)
Bernard Janković
(autor)
Katica Prskalo
(autor)
Poveznice na cjeloviti tekst rada:
Pristup cjelovitom tekstu rada doi www.sciencedirect.com dx.doi.orgCitiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus