Pregled bibliografske jedinice broj: 662401
Properties of Printer Calibration Targets
Properties of Printer Calibration Targets // International circular of graphic education and research, 6 (2013), 70-79 (podatak o recenziji nije dostupan, članak, znanstveni)
CROSBI ID: 662401 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Properties of Printer Calibration Targets
Autori
Donevski, Davor ; Milčić, Diana ; Borković, Jakov
Izvornik
International circular of graphic education and research (1868-0712) 6
(2013);
70-79
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
G7; printer calibration; calibration target
Sažetak
Printer calibration targets can differ with respect to aims of the calibration. In this study, GrayFinder target as described in the G7 Specification was modified and tested on an RGB printer. It was inspected whether it is beneficial to vary all three device channels instead of keeping one channel constant. The relations between input value RGB ranges and CIE L*a*b* domain were also monitored. It was found that varying all channels can lead to improvement by widening L*a*b* domain, with the cost of increasing the target size.
Izvorni jezik
Engleski
Znanstvena područja
Grafička tehnologija
POVEZANOST RADA
Projekti:
128-1281955-1951 - Standardizacija ekološki prihvatljivih procesa grafičkih komunikacija (Milčić, Diana, MZOS ) ( CroRIS)
Ustanove:
Grafički fakultet, Zagreb