Naslov
Comparison of the properties of clay polymer nanocomposites prepared by montmorillonites modified by silane and by quaternary ammonium salts

Autori
Huskić, Miroslav ; Žigon, Majda ; Ivanković, Marica

Izvornik
Applied clay science (0169-1317) 85 (2013); 109-115

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
silane; montmorillonite; clay polymer nanocomposite (CPN); X-ray diffraction; 29Si CP MAS NMR; thermogravimetric analysis

Sažetak
In this work, the silylation of sodium montmorillonite (Na+-Mt, Nanofil 757®) was performed using 3-aminopropyl triethoxy silane (APTES). Different reaction conditions were used varying the reaction time and the amount of the aminosilane. Epoxy-based nanocomposites were prepared with different amounts of silylated Mt or commercial organically modified Mt intercalated with stearylbenzyldimethyl ammonium chloride (Nanofil 2®) and distearyldimethyl ammonium chloride (Nanofil 8®), respectively. The grafting/intercalation of the aminosilane inside the Mt interlayer spaces were studied by means of Fourier transform infrared (FTIR), X-ray diffraction (XRD), nuclear magnetic resonance (NMR) and thermogravimetric analysis (TGA). After isothermal curing at 90oC the Mt epoxy nanocomposites were analyzed by means of XRD and dynamic mechanical analysis (DMA). The glass transition temperature of all prepared nanocomposites containing silylated Mt, is slightly higher than that of the neat epoxy (2 to 5oC). In the presence of 1 to 5 m% of silylated Mt in epoxy matrix the storage modulus increases of about 5 to 15% at 25oC, respectively, compared to the pristine epoxy matrix, while only 0-4% increase was observed for epoxy nanocomposites with commercial modified Mt.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo, Temeljne tehničke znanosti

POVEZANOST RADA