Pregled bibliografske jedinice broj: 644662
Poly(ethylene oxide)/silica nanocomposites - Impact of the sample state on the outcome of γ-irradiation
Poly(ethylene oxide)/silica nanocomposites - Impact of the sample state on the outcome of γ-irradiation // XXIII. Hrvatski skup kemičara i kemijskih inženjera - Knjiga sažetaka / Hadžiev, Andrea ; Blažeković, Zdenko (ur.).
Osijek: Hrvatsko društvo kemijskih inženjera i tehnologa (HDKI), 2013. str. 225-225 (poster, nije recenziran, sažetak, znanstveni)
CROSBI ID: 644662 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Poly(ethylene oxide)/silica nanocomposites - Impact of the sample state on the outcome of γ-irradiation
Autori
Jurkin, Tanja ; Pucić, Irina
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
XXIII. Hrvatski skup kemičara i kemijskih inženjera - Knjiga sažetaka
/ Hadžiev, Andrea ; Blažeković, Zdenko - Osijek : Hrvatsko društvo kemijskih inženjera i tehnologa (HDKI), 2013, 225-225
ISBN
978-953-6894-50-5
Skup
XXIII. Hrvatski skup kemičara i kemijskih inženjera
Mjesto i datum
Osijek, Hrvatska, 21.04.2013. - 24.04.2013
Vrsta sudjelovanja
Poster
Vrsta recenzije
Nije recenziran
Ključne riječi
poly(ethylene oxide) ; silica ; nanocomposites ; γ-irradiation ; films ; gels
Sažetak
γ-irradiation is a unique method of polymer modification that offers temperature-independent, clean and homogenous reaction initiation and results in a sterile product. On exposing to γ-irradiation poly(ethylene oxide), PEO, can both crosslink and degrade what impacts its crystallinity and numerous properties (mechanical, conductivity, etc). The overall outcome depends on the irradiation conditions and PEO characteristics and their interplay [1]. Addition of nanoparticles to polymer materials is known to improve mechanical properties in particular and to reduce crystallinity of semicrystalline polymers [2] but interaction of irradiation and nanoparticle addition is poorly investigated field. PEO/silica nanocomposite films were modified and nanocomposite gels were prepared by γ-irradiation up to 100 kGy, in air or under nitrogen. Thermal analysis, optical microscopy, X-ray diffraction and FTIR spectroscopy revealed that outcome mostly depended on the state of PEO matrix on irradiation and that the state of the sample also influenced the effect of nanosilica addition while its concentration was less significant. Nanosilica induced heterogenous nucleation and increased crystallinity proportional to its concentration in unirraddited films. In PEO/nano-SiO2 solid films irradiated in air nanosilica did not provide radiation resistance but probably enhanced oxidative degradation by increasing content of the more radiation sensitive amorphous phase. It might facilitate crystallization of broken chains on irradiation of nanocomposite films resulting in additional crystallinity increase of samples irradiated to 50 kGy and significant deterioration of mechanical properties at higher doses, especially for samples irradiated in contact with air. In the same dose range irradiation PEO/nano- SiO2 aqueous solutions produced crosslinked nanocomposite gels of much lower crystallinity and better mechanical properties. Radiochemical effects of nanosilica likely contributed to further reduction of crystallinity in nanocomposite gels. Pronounced changes on addition of 20 wt % of nano- SiO2 to both nanocomposite films and gels indicate a possible synergism of γ-irradiation and nanoparticle addition.
Izvorni jezik
Engleski
Znanstvena područja
Kemija
POVEZANOST RADA
Projekti:
098-0982904-2955 - Odnosi struktura-svojstvo modificiranih polimernih materijala (Pucić, Irina, MZOS ) ( CroRIS)
Ustanove:
Institut "Ruđer Bošković", Zagreb