Pregled bibliografske jedinice broj: 600068
Research corner joints in corpus furniture
Research corner joints in corpus furniture // Wood is good - With knowledge and technology to a competitive forestry and wood technology sector / Grbac, Ivica (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2012. str. 229-235 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 600068 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Research corner joints in corpus furniture
Autori
Župčić, Ivica ; Grbac, Ivica ; Bogner, Andrija ; Hadžić, Damir
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Wood is good - With knowledge and technology to a competitive forestry and wood technology sector
/ Grbac, Ivica - Zagreb : Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2012, 229-235
ISBN
978-953-292-026-0
Skup
Wood is good - With knowledge and technology to a competitive forestry and wood technology sector
Mjesto i datum
Zagreb, Hrvatska, 12.10.2012
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
corner joining; furniture; dowel; screw for wood; joining plate; bolt with rotating wedge
Sažetak
Flat corner joining is the most often used method in assembly of case furniture. This paper, therefore, has been researching the influence of dowels, back plate, bolt with rotating wedge, screw for wood and confirmat screw to the bending moment. The research was done on corner samples with dimensions of 100 x 100 x 100 (mm), made of three-layer chipboard, 18 mm thick, refined with foil. Based on the results of the research, the greatest bending moment was achieved in connections using a confirmat screw, and the weakest in connections using bolt with rotating wedge, 2.5 times weaker on average. The reason is delamination of chipboard during testing, while such delamination of chipboard was not observed in confirmat screw and screw for wood joints. It is characteristic of these types of samples for the bolt head to get pushed through the layers of the board itself. Average bending moment of the samples connected by confirmat screw amounted to 32.9 Nm, by dowel to 23.6 Nm, and by joining plate to 19.6 Nm.
Izvorni jezik
Engleski
Znanstvena područja
Drvna tehnologija
POVEZANOST RADA
Projekti:
068-0680720-0708 - Razvoj proizvoda od drva s ciljem očuvanja zdravlja (Grbac, Ivica, MZOS ) ( CroRIS)
068-0680720-0710 - Novi materijali, tehnološki procesi i proizvodi u finalnoj obradi drva (Bogner, Andrija, MZOS ) ( CroRIS)
Ustanove:
Fakultet šumarstva i drvne tehnologije