Naslov
Machine milking and daily changes of cow's teat condition

Autori
Stojnović, Miomir ; Alagić, Damir

Izvornik
Acta agriculturae slovenica. Suplement (1854-4800) Supplement 3 (2012); 303-1

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
dairy cows ; machine milking ; teat condition ; ultrasonographic scanning

Sažetak
The paper deals with daily changes of teat parameters of dairy cows caused by machine milking. Ultrasonographic scanner GE Medical Systems LOGIQ 100 PRO with linear array VE 5 – 5 MHz probe was used for scanning the teats. The scanning was conducted on a dairy farm in Križevci on 27 cows, nineteen of them of Holstein breed and eight of Simmental breed or SimmentalxHolstein crossed breed. The cows were housed in a free stall barn and milked in a herringbone 2x3 milking parlour with Alfa-Laval milking equipment with Duovac milking units. Teat scanning was done just before morning milking and immediately after milking on the right side of the udders for front and rear teats. A total of 432 measurements were carried out during the experiment. The following parameters were measured: teat canal length (TCL), teat end width (TEW), teat cistern width (TCW) and teat wall thickness (TWT). As fifth parameter ratio between teat wall thickness and teat cistern width (TWT/TCW) before and after milking was calculated. Length of teat canal for the front right teat increased in average for 15.44% after milking, and 24.38% for the rear right teat. Teat end width of the front and rear right teat increased after milking for 3.7% and 3.32%, respectively. Mean teat cistern width of the front right teat decreased after milking for 24.41% while for the rear right teat mean decrease was 25.83%. Teat wall thickness of the front and rear right teat increased after milking for 7.86% and 15.81% respectively. The ratio between teat cistern width and teat wall thickness and teat cistern width changed for the right front teat from 0.647 before milking to 0.924 after milking, and for the right rear teat from 0.649 to 1.013. Testing of significance of differences of teat dimensions before and after machine milking showed significant differences for all teat parameters, with the exception of teat end width for front right teat (p = 0, 069).

Izvorni jezik
Engleski

Znanstvena područja
Veterinarska medicina, Poljoprivreda (agronomija), Biotehnologija

POVEZANOST RADA