Pregled bibliografske jedinice broj: 598329
The influence of buttonhole reinforcement design on deformation distribution in textiles
The influence of buttonhole reinforcement design on deformation distribution in textiles // Book of Proceedings of the 6th International Textile, Clothing and Design Conference 2012 - Magic World of Textiles / Dragčević, Zvonko ; Hursa Šajatović, Anica ; Vujasinović, Edita (ur.).
Zagreb: Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2012. str. 348-353 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 598329 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The influence of buttonhole reinforcement design on deformation distribution in textiles
Autori
Hursa Šajatović, Anica ; Drvar, Nenad ; Šomođi, Željko ; Rogale, Dubravko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Book of Proceedings of the 6th International Textile, Clothing and Design Conference 2012 - Magic World of Textiles
/ Dragčević, Zvonko ; Hursa Šajatović, Anica ; Vujasinović, Edita - Zagreb : Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2012, 348-353
Skup
6th International Textile, Clothing and Design Conference : Magic World of Textiles (6 ; 2012)
Mjesto i datum
Dubrovnik, Hrvatska, 07.10.2012. - 10.10.2012
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
clothing technology; design of buttonhole reinforcements; object grating method; deformation.
Sažetak
During the manufacturing process, two-dimensional fabric shapes must be cut and reconnected during the sewing processes, which forms the final 3D shape of clothing item. Depending of final designed model, clothes often consist of cuts, pockets and slits which cause local structural weakness that must be additionally reinforced. For this purpose, different shape and geometry of reinforcements are used (e.g. rectangular, half circle, radial). Because of very complex loading conditions of textiles during its lifetime, experimental determination of deformation on fabrics, textiles or part of clothes is necessary for further improvements of engineering planning and design of quality fabrics and clothing. For this purpose, in order to measure surface deformation on fabrics and parts of clothing, optical measuring system ARAMIS is applied. An investigation of deformation in the vicinity of straight and eyelet buttonholes is presented. Investigations were performed on the samples of straight buttonholes with rectangular, half circle and radial reinforcements, and samples of eyelet buttonholes with two different types of 'eye' (types 2 and 5). Size and geometry of reinforcements are determined by appropriate parameters, as well as the length and density of stitches which can be adjusted on microprocessor of Brother sewing automata. Deformations in the samples are measured during loading using the ARAMIS measuring system. The results indicate that the highest deformation appear in the vicinity of the buttonhole cut.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Projekti:
117-1171879-1894 - Inteligentna odjeća i okruženje (Rogale, Dubravko, MZOS ) ( CroRIS)
117-1171879-1899 - Numeričko modeliranje u inženjerskoj analizi tekstila i odjeće (Šomođi, Željko, MZOS ) ( CroRIS)
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb
Profili:
NENAD DRVAR
(autor)
Dubravko Rogale
(autor)
Željko Šomođi
(autor)
Anica Hursa Šajatović
(autor)