Pregled bibliografske jedinice broj: 504338
Structural Measures to Improve the Efficiency of Biological Wastewater Treatment Plants
Structural Measures to Improve the Efficiency of Biological Wastewater Treatment Plants // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 52 (2010), 3; 333-342 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
CROSBI ID: 504338 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Structural Measures to Improve the Efficiency of Biological Wastewater Treatment Plants
Autori
Anić-Vučinić, Aleksandra ; Vouk, Dražen ; Zebić, Maja
Izvornik
Strojarstvo : časopis za teoriju i praksu u strojarstvu (0562-1887) 52
(2010), 3;
333-342
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, prethodno priopćenje, znanstveni
Ključne riječi
Aeration ; Biological reactors ; Hydraulic jet ; Percolator ; Treatment ; Wastewater
Sažetak
The purpose of this paper is to test of certain structural measures to improve the efficiency of the biological wastewater treatment plants by preliminary adding of oxygen to fresh wastewater and rising of the pre- treatment level. The paper compares the possibilities of increasing the oxygen content in wastewater by hydraulic jet, and by straining through a percolator with draught. The comparison is based on results obtained by testing on physical models in laboratory conditions. In both cases, several scenarios were analyzed, with different combinations of structural and hydraulic parameters (number of discharge outlets, outlet size, jet velocity and angle, size of percolator padding, etc.). Based on determined results of dissolved oxygen input (increment of dissolved oxygen concentration), the percolator was selected as the element of higher efficiency and applied on the pilot biological plant for treatment of sanitary wastewater. Based on determined efficiency of wastewater treatment during the period of two years, interpolation of the percolator as pretreatment of wastewater in biological treatment plants may be assessed as justified and useful solution.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo, Strojarstvo
POVEZANOST RADA
Projekti:
082-0000000-3243 - Razvoj i primjena metoda modeliranja pronosa tvari i energije tekućinama (Gjetvaj, Goran, MZOS ) ( CroRIS)
Ustanove:
Građevinski fakultet, Zagreb,
Fakultet strojarstva i brodogradnje, Zagreb
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
Uključenost u ostale bibliografske baze podataka::
- Fluidex (Fluid Engineering Abstracts)