Pregled bibliografske jedinice broj: 478023
Mechanical and magnetic properties of Cu55Hf45-xTix metallic glasses
Mechanical and magnetic properties of Cu55Hf45-xTix metallic glasses // 17th International Symposium on Metastable, amorphous and Nanostructured Materials (ISMANAM 2010) : Program and Abstracts / Loffler, Jorg (ur.).
Zürich: Swiss Federal Institute of Technology-ETH, 2010. str. 145-145 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 478023 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Mechanical and magnetic properties of Cu55Hf45-xTix metallic glasses
Autori
Ristić, Ramir ; Babić, Emil ; Pajić, Damir ; Zadro, Krešo ; Figueroa, Ignacio Alejandro ; Davies, Hywel ; Todd, Iain ; Kuršumović, Ahmed ; Stubičar, Mirko
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
17th International Symposium on Metastable, amorphous and Nanostructured Materials (ISMANAM 2010) : Program and Abstracts
/ Loffler, Jorg - Zürich : Swiss Federal Institute of Technology-ETH, 2010, 145-145
Skup
International Symposium on Metastable, amorphous and Nanostructured Materials (17 : 2010)
Mjesto i datum
Zürich, Švicarska, 04.07.2010. - 09.07.2010
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
metallic glasses; rapid solidification; quenching; mechanical properties
Sažetak
A recent study of Cu55Hf45-xTix metallic glasses with 0 ≤ x ≤ 45 [1] revealed the formation of bulk metallic glasses (BMG) for 15 ≤ x ≤ 30. In the same composition range the ratio of the glass transition temperature Tg, and the liquidus temperature Tl, showed a shallow maximum, consistent with the highest glass forming ability (GFA). Here, we present the results for some mechanical properties (Young's modulus and microhardness) and magnetic properties (magnetic susceptibility) of these alloys and compare their variation with x with those for Tg and the crystallization temperature Tx. All measured properties show monotonic variations with x with no particular features in the composition range for BMG formation. This is similar to the behaviour observed for binary CuxHf1-x and CuxZr1-x glassy alloys [2]. However, in the binary alloys, the elastic stiffness and the thermal stability (Tx) followed the same trend, whereas in the ternary alloys an increase in stiffness is accompanied by a decrease in thermal stability. Also, in these ternary alloys the increase of magnetic susceptibility with x is accompanied by increased stiffness, whereas, in binary alloys, they follow the opposite trend. The possible origins of the observed behaviour are briefly discussed.
Izvorni jezik
Engleski
Znanstvena područja
Fizika
POVEZANOST RADA
Projekti:
035-0352827-2841 - Materijali sa elektronskom strukturom modeliranom modernim tehnikama priprave (Aviani, Ivica, MZOS ) ( CroRIS)
119-1191458-1017 - Nanomagneti (Zadro, Krešo, MZOS ) ( CroRIS)
119-1191458-1019 - Elektromagnetska svojstva nanostrukturiranih materijala (Babić, Emil, MZOS ) ( CroRIS)
152-1201833-1471 - Utjecaj duplex postupka na strukturu čelika i inženjerstvo površina (Krumes, Dragomir, MZOS ) ( CroRIS)
Ustanove:
Institut za fiziku, Zagreb,
Prirodoslovno-matematički fakultet, Zagreb,
Strojarski fakultet, Slavonski Brod
Profili:
Mirko Stubičar
(autor)
Krešo Zadro
(autor)
Ramir Ristić
(autor)
Emil Babić
(autor)
Damir Pajić
(autor)