Naslov
Effects of SBS on Phase Morphology of iPP/aPS Blends

Autori
Šmit, Ivan ; Radonjič, Gregor

Izvornik
Polymer Engineering and Science (0032-3888) 40 (2000), 10; 2144-2160

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
polymer blends; polypropylene blends; polystyrene blends; SBS block copolymer; phase morphology

Sažetak
The supermolecular structure of binary isotactic polypropylene/poly(styrene-b-butadiene-b-styrene) (iPP/SBS) and isotactic polypropylene/atactic polystyrene (iPP/aPS) compression molded blends and that of ternary iPP/aPS/SBS blends were studied by optical microscopy, scanning and transmission electron microscopy, wide-angle X-ray diffraction and differential scanning calorimetry. Nucleation, crystal growth, solidification and blend phase morphology are affected by the addition of amorphous components (SBS and aPS). As a compatibilizer in immiscible iPP/aPS blends, SBS formed interfacial layer between dispersed honeycomb-like aPS/SBS particles and the iPP matrix, thus influencing the crystallization process in iPP. The amount of SBS and aPS, and compatibilizing effieciency of SBS, determine the size of dispersed aPS, SBS, and aPS/SBS particles and, consequently, the final blend phase morphologies: well-developed spherulitic morphology, cross-hatched structure with blocks of sandwich lamellae and cocontinuous morphology. The analysis of relationship between size of spherulites and dispersed particles gave criterion relation which showed that, in the case of a well-developed spherulitization, the spherulites should be about fourteen times larger than incorporated dispersed particles; i.e. to be large enough to engulf dispersed inclusions without considerable disturbing of the spherulitic structure.

Izvorni jezik
Engleski

Znanstvena područja
Kemija

POVEZANOST RADA