Naslov
Experimental study of drilling carbon and aramide fibre reinforced composite material

Autori
Mišković, Ante ; Koboević, Nikša

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 11th International Research/expert confeerence "Trends in the development of machinery and associated technology" (TMT 2007) / Ekinović, Sabahudin ; Yalcin, Senay ; Vivancos, Calvet Joan - Zenica : Faculty of Mechanical Engineering, University of Zenica, 2007, 19-22

ISBN
978-9958-617-34-8

Skup
International Research/expert confeerence "Trends in the development of machinery and associated technology" (11 ; 2007)

Mjesto i datum
Hammamet, Tunis, 05.09.2007. - 09.09.2007

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
composite materials; drill geometry; quality of drilling

Sažetak
Parts made out of composite materials are joined and connected by elements for joining into complex construction sections and subsections. For this purpose, it is necessary to fabricate numerous holes with different dimensions. Drilling is one of the most important cutting operations which are currently carried out on fiber reinforced composite materials. The following errors are presented during the drilling of composite materials: delamination, fuzzing, edge chipping, spalling, surface roughness, roundness and dimensional errors. With correct choice of cutting regimes and cutting tool geometry it is possible to ensure required quality of the drilled holes. This paper gives research results of drilling carbon and aramide fibre reinforced composite materials.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA