Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 338155

Influence of Different Process Parameters on Vegetable Drying in Gas Fluidized Beds


Ježek, damir; Tripalo, Branko; Brnčić, Mladen
Influence of Different Process Parameters on Vegetable Drying in Gas Fluidized Beds // Proceedings of the Fourth International Conference on Compact Heat Excangers and Enhancement Technology for the Process Industries
Kreta, Grčka, 2003. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 338155 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Influence of Different Process Parameters on Vegetable Drying in Gas Fluidized Beds

Autori
Ježek, damir ; Tripalo, Branko ; Brnčić, Mladen

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the Fourth International Conference on Compact Heat Excangers and Enhancement Technology for the Process Industries / - , 2003

ISBN
1-56700-195-5

Skup
Fourth International Conference on Compact Heat Excangers and Enhancement Technology for the Process Industries

Mjesto i datum
Kreta, Grčka, 28.09.2003. - 30.10.2003

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
heat transfer; immersion; fluidization

Sažetak
The obtained results present different process parameters for drying in air fluidized beds and also a significant contribution of an immersedheat exchanger element. In this process, the drying time at lower temperatures is shorter, the product quality is higher and the rehydration time is shorter as well. This paper comprises research work on celeriac and peas dried in a fluidized bed. The goal has been to obtain dry vegetables with 6% to 10% water content and of good rehydration quality. Experimental data (bed height, gas temperature and velocity, pressure drop over the bed, drying time and total humidity of drying) have been measured and relevant values have been calculated. First the aerodynamic properties of fluidizing bede in motion were experimentally investigated and then the particles were dried at given temperatures in different time intervals and at an air flow rate ranging from 0, 30 m/s to 4, 93 m/s. Two columns of different dimensions were used: a cylindrical column (d = 0, 10 m and h = 1, 0 m) and a square column (a = 0, 09 m, b = 0, 18 m and h = 0, 83 m). Working parameters were: 1. Particle dimensions (blanched): 5x5x5 mm and 5x5x10 mm for celeriac and 8 mm (first class) and 9 mm (second class) diameter for peas 2. Particle mass: 0, 200 kg, 0, 300 kg and 0, 400 kg 3. Drying temperature 40°C, 50°C and 60°C The results have shown that drying of vegetables in a fluidized bed produces dry vegetable pieces of excellent quality in a much shorter time than in continuous bell-dryers which are generally used. The best results of celeriac drying were obtained with the following dimensions of celeriac: 5x5x5 mm, 200 g, in a cylindrical column at 60°C and the maximum air flow rate of 4, 3 m/s. The best results of peas drying were achieved with the first class peas, 400 g, in a square column at 60°C and at the maximum air flow rate of 2, 46 m/s.

Izvorni jezik
Engleski

Znanstvena područja
Prehrambena tehnologija



POVEZANOST RADA


Ustanove:
Prehrambeno-biotehnološki fakultet, Zagreb

Profili:

Avatar Url Mladen Brnčić (autor)

Avatar Url Damir Ježek (autor)

Avatar Url Branko Tripalo (autor)


Citiraj ovu publikaciju:

Ježek, damir; Tripalo, Branko; Brnčić, Mladen
Influence of Different Process Parameters on Vegetable Drying in Gas Fluidized Beds // Proceedings of the Fourth International Conference on Compact Heat Excangers and Enhancement Technology for the Process Industries
Kreta, Grčka, 2003. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Ježek, d., Tripalo, B. & Brnčić, M. (2003) Influence of Different Process Parameters on Vegetable Drying in Gas Fluidized Beds. U: Proceedings of the Fourth International Conference on Compact Heat Excangers and Enhancement Technology for the Process Industries.
@article{article, author = {Je\v{z}ek, damir and Tripalo, Branko and Brn\v{c}i\'{c}, Mladen}, year = {2003}, keywords = {heat transfer, immersion, fluidization}, isbn = {1-56700-195-5}, title = {Influence of Different Process Parameters on Vegetable Drying in Gas Fluidized Beds}, keyword = {heat transfer, immersion, fluidization}, publisherplace = {Kreta, Gr\v{c}ka} }
@article{article, author = {Je\v{z}ek, damir and Tripalo, Branko and Brn\v{c}i\'{c}, Mladen}, year = {2003}, keywords = {heat transfer, immersion, fluidization}, isbn = {1-56700-195-5}, title = {Influence of Different Process Parameters on Vegetable Drying in Gas Fluidized Beds}, keyword = {heat transfer, immersion, fluidization}, publisherplace = {Kreta, Gr\v{c}ka} }




Contrast
Increase Font
Decrease Font
Dyslexic Font