Pregled bibliografske jedinice broj: 29940
Effect of boronising on erosion corrosion of mild steel
Effect of boronising on erosion corrosion of mild steel // Chemical and biochemical engineering quarterly, 12 (1988), 4; 207-211 (podatak o recenziji nije dostupan, članak, znanstveni)
CROSBI ID: 29940 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Effect of boronising on erosion corrosion of mild steel
Autori
Aračić, Stjepan ; Esih, Ivan ; Krumes, Dragomir
Izvornik
Chemical and biochemical engineering quarterly (0352-9568) 12
(1988), 4;
207-211
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
boronising; mild steel; corrosion; erosion; synergy
Sažetak
The influence of boronising oin erosion corrosion of mild steel in NaCl/SiO2.suspension has been investigated. Boronising was parformed in a solid mixture for 6 hours at 900 C. Untreated (normalised) and boronised specimens were exposed under dynamic conditions to corrosion in an acidified NaCl-solution, to erosion in a hydrocarbon condensate from natural gas with suspended quartz sand, and to erosion corrosion in the mentioned NaCl-solution with suspended quartz sand. Following testing techniques were applied: gravimetry, cyclic polarisation, microhardness measurements, and structural analysis by optical micrography as well as by X-ray diffraciton.
Considerable improvement of behaviour under corrosive and erosive-corrosive circumstances has been established for boronised specimens. At the same time, synergetic effect between erosion and corrosion has been observed on specimens of both types.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb,
Strojarski fakultet, Slavonski Brod
Citiraj ovu publikaciju:
Uključenost u ostale bibliografske baze podataka::
- Chemical Abstract
