Naslov
On the cross-section distortion of large tankers subjected to bending

Autori
Pavazza, Radoslav ; Blagojević, Branko ; Plazibat, Bože

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
XVII. simpozij Teorija i praksa brodogradnje SORTA 2006 / Dobrinić, Julijan - Rijeka : Tehnički fakultet Sveučilišta u Rijeci, 2006, 603-615

Skup
XVII. simpozij Teorija i praksa brodogradnje SORTA 2006

Mjesto i datum
Opatija, Hrvatska, 19.10.2006. - 21.10.2006

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
19-21.10.2006.
(distortion; cross-section; ship hull; single longitudinal bulkhead)

Sažetak
The paper deals with distortion of hull cross-sections of large modern tankers with one longitudinal bulkhead subjected to bending in the vertical plane of symmetry. The cross-section distortion is considered in the limit case. It is assumed that hull panels — bottom, deck, sides and longitudinal bulkheads — are hinged along their longitudinal edges. The additional stresses and displacements due to distortion with respect to the stresses and displacements of the ordinary hull girder bending theory are analysed. The assumption of “ hinged cross-sections” is opposite to the assumption of “ rigid cross-sections” . Both are limiting cases of stresses and deformations of actual hull structures, particularly in the case of large tankers. A comparison with the results of the finite element analysis is provided.

Izvorni jezik
Engleski

Znanstvena područja
Brodogradnja

POVEZANOST RADA