Pregled bibliografske jedinice broj: 258889
Deposition of sol-gel ZrO_2 layers on Al_2O_3 coating
Deposition of sol-gel ZrO_2 layers on Al_2O_3 coating // MED06, materials-energy-design / Kennedy, David (ur.).
Dublin: Technological University Dublin, 2006. str. 299-306 (predavanje, nije recenziran, cjeloviti rad (in extenso), ostalo)
CROSBI ID: 258889 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Deposition of sol-gel ZrO_2 layers on Al_2O_3 coating
Autori
Jakovljević, Suzana ; Grilec, Krešimir ; Ćurković, Lidija
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo
Izvornik
MED06, materials-energy-design
/ Kennedy, David - Dublin : Technological University Dublin, 2006, 299-306
ISBN
1900454 23 8
Skup
International conference on materials, energy and design MED06
Mjesto i datum
Dublin, Irska, 14.03.2006. - 17.03.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Nije recenziran
Ključne riječi
sol-gel; plasma spraying; wear
Sažetak
The paper describes a method of coating which combines two different methods of producing the layers. The first layer is Al2O3 produced by plasma spraying with thickness of 350 micrometer which was deposited on the stainless steel (X22CrMoV121) substrate. After that, ZrO_2 layer was deposited on the Al2O3 coating by a sol-gel process using dip coating technique. The dip coating process was performed four or eight times in order to produce a thicker layer. In experimental work, coating produced by this method was tested on micro-scale abrasion tester and ball on disc tester. Results shows that sol-gel ZrO_2 layers decrease wear factor tested by micro-scale abrasion tester and decrease coefficient of friction and wear factor by ball on disc tester.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
