Naslov
Refinement of HREM image processing analysis of defects in mechanically alloyed ZrO2-Y2O3 Powders

Autori
Tonejc, Anđelka ; Tonejc, Antun ; Farrants, Georg ; Hovmoller, Sven

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
ECM-18 posters-abstracts / Kužel Radomir - Prag : Czech Crystallographic Association, 1998

Skup
Eighteenth European Crystallographic Meeting

Mjesto i datum
Prag, Češka Republika, 15.08.1998. - 20.08.1998

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Mechanical Alloying; Ball Milling; HRTEM Image Processing; Zirconia; Yttria

Sažetak
Partially stabilized zirconia (PSZ-mixture of tetragonal and cubic zirconia or a mixture of other ceramic materials and metastable tetragonal zirconia) is generally recognized as the ceramics material with the most useful mechanical properties and it is named "ceramic steel" [1,2]. The stabilisation of the high temperature cubic phase at room temperature is possible by alloying zirconia with other oxides such as MnO, NiO, Cr2O3, Fe2O3, Y2O3, Ce2O3. However, a very high temperature (over 10000C) of calcination or sintering is required for preparation of solid solutions of zirconia with these oxides [3,4]. High energy ball milling (mechanical alloying) [5,6] has become a widely used processing method for producing intermetallic compounds, extended solid solutions (even of immiscible elements), amorphous alloys and nanocrystalline materials [7]. However, high energy ball milling (BM) was initially applied mainly to produce alloys formed from pure metals or intermetallic compounds, and only recently [8] has it been shown that mechanical alloying can also be used for ceramic materials (ZrO2-Ce2O3 system). Also, high energy ball milling could be equivalent to thermal processes in achieving high temperature phase transitions [9]. Recently, it was reported [10,11] that it is possible to synthesise ZrO2-10mol% Y2O3 cubic solid solutions as the end product of mechanical alloying, although in first stage of alloying the tetragonal phase appeared. It is generally believed that alloying and amorphization are brought about by a solid state reaction during mechanical alloying, as a mixture of thin layers [12]. This is the same mechanism as that which occurs in thin films. In the present work we have investigated using transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM) alloying process in m-ZrO2- 10 mol% Y2O3 powders using HRTEM image processing. We present results obtained by applying the CRISP program [13] to analyse HRTEM photographs of mechanically alloyed materials. We focused our investigation to following regions: a) a grain boundary region; b) to the region of stacking faults near grain boundary; c) the region of overlapping layers of zirconia and yttria [14]. Fourier filtering revealed on the atomic level one possible sequence of alloying that occurred in the grain boundary, on stacking faults and in the overlapping layers. Performing Fourier filtering with different filtering mask, i. e. making refinement of filtering analyses, we are able to isolate separate planes introduced into correct order of particular family of m-ZrO2 lattice. The introduced planes weather belonging to m-ZrO2 or Y2O3, could be regarded as dislocations introduced into perfect m-ZrO2 lattice and as they are identified in corresponding FT from whom the filtering was performed it is possible to give interpretation about transformation of mechanical alloying observed in particular HRTEM image.

Izvorni jezik
Engleski

Znanstvena područja
Fizika

POVEZANOST RADA