Pregled bibliografske jedinice broj: 22336
Vortex Flow Meter with a Queazy-twodimensional Bluff Body for a Lower Minimum Reynolds Number
Vortex Flow Meter with a Queazy-twodimensional Bluff Body for a Lower Minimum Reynolds Number // XV IMEKO
Osaka, 1999. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 22336 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Vortex Flow Meter with a Queazy-twodimensional
Bluff Body for a Lower Minimum Reynolds
Number
Autori
Kesić, Petar ; Džuho, Hasan ; Damić, Vjekoslav
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
XV IMEKO
/ - Osaka, 1999
Skup
XV IMEKO World Congress
Mjesto i datum
Osaka, Japan, 01.06.1999. - 07.06.1999
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
vortex flowmeter; flowmeter calibration; installation effects
Sažetak
Performances of vortex meter with a queazy-twodimensional bluff body have been investigated. The bluff body dimensions were optimizied in meter body of inside diameter 50 mm. The ratio of the bluff body width and the pipe diameter changes from 0.24 at the tube axis to 0.28 at the tube walls. The K-factor linearity was found to be better than 0.75% in the range 1:20 for the Reynolds number larger than 20000 and better than 1.5% for the Reynolds number larger than 13000. The prototype series consisting of four meters was produced and calibrated with water and air. The mean Strouhal number for the entire series was 0.848 with the linearity limits 1.5%. The pressure loss coefficient is equal to 1.5.The effects of the upstream and downstream disturbances were studied.
Izvorni jezik
Engleski
Znanstvena područja
Brodogradnja, Zrakoplovstvo, raketna i svemirska tehnika
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb,
Sveučilište u Dubrovniku