Pregled bibliografske jedinice broj: 200280
Analysis of interface at explosive welded plates from low-carbon steel and titanium
Analysis of interface at explosive welded plates from low-carbon steel and titanium // Metalurgija, 43 (2004), 2; 83-86 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 200280 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Analysis of interface at explosive welded plates from low-carbon steel and titanium
Autori
Kosec, Borut ; Kosec, Ladislav ; Čevnik, G. ; Fajfar, P. ; Gojić, Mirko ; Anžel, Ivan
Izvornik
Metalurgija (0543-5846) 43
(2004), 2;
83-86
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
explosive welding; plate; composite material; low-carbon steel; titanium; vortex; melt
Sažetak
On the basis of experimentally obtained data, it was established that a very thin layer of a melt is generated at the explosive welding of two metals at the bond interface within which impurities flow at the bond during melting. Rapid cooling after the collision generates an alloy of different structure and very small grains of an average thickness approximately 1 to 2 x10exp(-6)m. The generation of such an amorphous layer in the bond area has been noticed with various metal combinations and represents a fundamental mechanism of explosive welding of metals. Using the metallographic analysis, the development of the vortices which were formed by the explosive welding of low-carbon steel and titanium plates is described in the paper.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
Uključenost u ostale bibliografske baze podataka::
- Chemical Abstracts
- Materials Science Citation Index
- Research Alert
- Metals Abstract
- Metadex
- Geobase
- Mechanical Engeeniring Abstracts etc.
