Pregled bibliografske jedinice broj: 198034
Light Plane Position Determination for the Purpose of Structured Light Scanning
Light Plane Position Determination for the Purpose of Structured Light Scanning // Proceedings of the IEEE International Symposium on Industrial Electronics 2005 / Perić, Nedjeljko ; Petrović, Ivan ; Butković, Željko (ur.).
Zagreb: Institute of Electrical and Electronics Engineers (IEEE), 2005. str. 1315-1319 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 198034 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Light Plane Position Determination for the Purpose of Structured Light Scanning
Autori
Pribanić, Tomislav ; Cifrek, Mario ; Peharec, Stanislav
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the IEEE International Symposium on Industrial Electronics 2005
/ Perić, Nedjeljko ; Petrović, Ivan ; Butković, Željko - Zagreb : Institute of Electrical and Electronics Engineers (IEEE), 2005, 1315-1319
Skup
International Symposium on Industrial Electronics 2005, ISIE 2005
Mjesto i datum
Dubrovnik, Hrvatska, 20.06.2005. - 23.06.2005
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
structured light; 3D shape reconstruction; camera calibration
Sažetak
Structured light illumination is widely spread approach for 3D shape reconstruction. Very common implementation is scanning the scene of interest with hard edge stripe via video projector. During the scanning light planes are actually projected across the space and its position in time is needed to triangulate 3D position of some point. Traditionally light plane equation is readily obtained in case of calibrated video projector. This paper represents method where light plane positions are determined without explicit projector calibration. Comparison of traditional and proposed method showed that there is no difference in terms of reconstruction accuracy. However, two major advantages of proposed method are that end user can sooner start using the system itself and system implementation is easier primarily in software sense.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika