Pregled bibliografske jedinice broj: 16065
Stress Correction in Spur Tooth Root
Stress Correction in Spur Tooth Root // Proceedings of the International Conference"Theory and Practice of Gearing" / V.I.Goldfarb (ur.).
Iževsk: IFTOMM, 1998. str. 85-90 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 16065 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Stress Correction in Spur Tooth Root
Autori
Marunić, Gordana
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the International Conference"Theory and Practice of Gearing"
/ V.I.Goldfarb - Iževsk : IFTOMM, 1998, 85-90
Skup
Theory and Practice of Gearing
Mjesto i datum
Iževsk, Ruska Federacija, 18.11.1998. - 20.11.1998
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
spur gear; stress correction; tooth root; 3DFEM
Sažetak
The state of stress in spur tooth root is determined by means of the three-diomensional finite element method. The calculations are performed for the gears loaded by uniform load distribution along the tooth tip, varying the gear teeth number, the rim thickness and the tooth facewidth. On the basis of computed maximum tensile and equvalent Von Mises root stresses, the stress correction factors are defined in relation to the standards DIN 3990/ISO 6336, to underline the difference refering to usual two-dimensional approach for spur gear analysis.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
