Pregled bibliografske jedinice broj: 1277263
Properties of sol-gel Ce-TiO2 film
Properties of sol-gel Ce-TiO2 film // 1st International Conference of the Croatian Ceramic Society (CroCerS): Advanced Ceramics in Derivative Configurations (1st ACDC 2023) / Mandić, Vilko (ur.).
Zagreb: Fakultet kemijskog inženjerstva i tehnologije Sveučilišta u Zagrebu, 2023. str. 43-43 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1277263 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Properties of sol-gel Ce-TiO2 film
Autori
Briševac, Debora ; Ćurković, Lidija ; Ljubas, Davor ; Mandić, Vilko
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
1st International Conference of the Croatian Ceramic Society (CroCerS): Advanced Ceramics in Derivative Configurations (1st ACDC 2023)
/ Mandić, Vilko - Zagreb : Fakultet kemijskog inženjerstva i tehnologije Sveučilišta u Zagrebu, 2023, 43-43
ISBN
978-953-6470-99-0
Skup
Advanced Ceramics in Derivative Configurations (1st ACDC 2023)
Mjesto i datum
Dubrovnik, Hrvatska, 26.05.2023. - 29.06.2023
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Ce-TiO2 ; ciprofloxacin ; photocatalytic degradation ; UV-A radiation ; solar radiation
Sažetak
In this study, sol-gel process was used for the preparation of Ce-TiO2 film with the following amount of cerium: 0.08 wt. %, 0.40 wt. %, 0.80%, 2.40 wt. %, 4.10 wt. % and 73.3 wt. %. For the preparation of the sol titanium isopropoxide and cerium (III) nitrate hexahydrate as a precursor, 2-propanol as a solvent, acetylacetone for complexation, distilled water for hydrolysis, and nitric acid as a catalyst were used. Ce-TiO2 sol was deposited on a borosilicate glass substrate using a flow coating method, dried at 100 °C for 60 min, and heat-treated at 450 °C for 120 min (3 °C/min). Photocatalytic degradation of the pharmaceutical ciprofloxacin (CIP) dissolved in water was investigated by means of Ce-TiO2 films irradiated with UV-A and solar-like radiation. The film’s surface morphology and roughness parameters were analyzed by atomic force microscopy (AFM). Thermogravimetric analysis and differential scanning calorimetry (DSC/TG) were used to determine weight loss and endothermic and exothermic reactions during heat treatment. X-ray diffraction (XRD) was used to determine phase composition and parameters and volumes of unit cells. Obtained results showed that Ce-TiO2 film with 0.80 wt. % Ce improves photocatalytic degradation of CIP under UV-A and solar-like radiation compared to the pure TiO2 film.
Izvorni jezik
Engleski
Znanstvena područja
Kemija, Strojarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
HRZZ-IP-2014-09-2353 - Sudbina farmaceutika u okolišu i tijekom naprednih postupaka obrade voda (PharmaFate) (Babić, Sandra, HRZZ - 2014-09) ( CroRIS)