Naslov
Influence of Alumina Precursors on Microstructure and Creep Behavior of Sol-Gel Derived Mullite Ceramics

Autori
Ivanković, Hrvoje ; Tkalčec, Emilija ; Rein, Ruediger ; Schmidt, Helmut

Izvornik
Key engineering materials (1013-9826) 264-268 (2004); 997-1000

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
sol-gel ; mullite ; microstructure ; creep

Sažetak
The effect of alumina precursors on microstructure, sintering and creep behavior of sol-gel derived mullite ceramics was studied by scanning and transmission electron microscopy (SEM, TEM and HRTEM), dilatometry and measuring the creep resistance in 4-point bending mode. When aluminum nitrate nonahydrate was used as the precursor, elongated crystals (with longer axis about 5-7 mm) were embedded into a matrix of polyhedral much smaller grains. This morphology was due to overlapping of mullite crystallization and viscous flow sintering. Equiaxial mullite grains with 1.3 μ m mean sizes were obtained using boehmite (γ -AlOOH) as alumina precursor. Transient alumina formed in situ by the decomposition of boehmite shifted the mullite formation above the sintering temperature, and allowed the formation of equiaxial mullite grains. Four-point bending creep behavior of mullite ceramics was studied in the temperature range of 1320-1400°C under the stresses between 40 and 160 MPa. The higher creep rate and the smaller activation energy (Q= 606± ; ; ; ; 33 kJ/mol) exhibited the sample with bimodally distributed grain sizes, whereas a smaller creep rate and the higher activation energy (Q=743± ; ; ; ; 18 kJ/mol) were obtained for mullite ceramic with monomodally distributed grain sizes.

Izvorni jezik
Engleski

Znanstvena područja
Fizika, Kemijsko inženjerstvo

Napomena
Conference: 8th Conference of the European-Ceramic-Society Location: Istanbul, TURKEY Date: JUN 29-JUL 03, 2003

POVEZANOST RADA