Naslov
Post-Cure Development of the Degree of Conversion and Mechanical Properties of Dual-Curing Resin Cements.

Autori
Carek, Andreja ; Dukarić, Ksenija ; Miler, Helena ; Marović, Danijela ; Tarle, Zrinka ; Par, Matej

Izvornik
Polymers (2073-4360) Vol. 14 (2022), 17; 3649-3649

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
resin cements ; dual-curing ; light-curing ; self-curing ; adhesive luting ; degree of conversion ; flexural strength ; flexural modulus

Sažetak
This study investigated the effect of different curing conditions on the degree of conversion and mechanical properties of contemporary dual-curing resin cements. The material specimens were either light- cured directly, light-cured through a 1-mm lithium disilicate glass- ceramic layer, or self- cured. The degree of conversion was measured in 0.1-mm films using Fourier-transform infrared spectroscopy 1 day, 7 days, and 28 days post-cure. Specimens used to study the flexural strength and modulus were prepared according to the ISO 4049 protocol, stored for 28 days post-cure, and subjected to accelerated aging by absolute ethanol immersion. The degree of conversion values ranged between 44.3–77.8%. Flexural strength varied between 11.4–111.1 MPa, while flexural modulus amounted to 0.7–5.5 GPa. The degree of conversion was significantly affected by material type, curing conditions, and post-cure time ; however, variations in curing conditions were the least influential factor. A statistically significant effect of curing conditions on the degree of conversion was identified for only one of the five materials tested, whereas the flexural strength and modulus of all tested materials were significantly reduced in the experimental groups that were light-cured through a ceramic layer or self-cured. The effect size analysis showed that mechanical properties were most affected by the material type, while the differences in curing conditions were less influential. A comparison of the degree of conversion and mechanical properties indicated that different curing conditions may lead to significantly different flexural strength and modulus, which are not necessarily accompanied by identifiable variations in the degree of conversion.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija, Dentalna medicina

POVEZANOST RADA