Pregled bibliografske jedinice broj: 1243941
Manufacture of soybean extruder screws using a lathe with a whirling attachment
Manufacture of soybean extruder screws using a lathe with a whirling attachment // International Journal of Machining and Machinability of Materials, 24 (2022), 5; 350-357 doi:10.1504/IJMMM.2022.126595 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1243941 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Manufacture of soybean extruder screws using a lathe
with a whirling attachment
Autori
Botak, Zlatko ; Pisačić, Katarina ; Horvat, Marko ; Ficko, Mirko
Izvornik
International Journal of Machining and Machinability of Materials (1748-5711) 24
(2022), 5;
350-357
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
whirling process ; thread cutting ; surface quality ; extruder screw
Sažetak
Long-threaded surfaces and worms can be machined by whirling, such that the cutting head removes material from the workpiece. Whirling can be performed using specialised cutting tools or standard lathes equipped with whirling thread- cutting devices. Worm cutting using a standard lathe is cheaper than employing a specialised device, but certain limitations imposed by the lathe technical parameters create risks of undercutting and interference between the workpiece and whirling attachment. For successful machining it was necessary to adjust the construction of the tool holder and the number of revolutions of the tool and the workpiece. In this paper, we modify a standard whirling device to overcome these issues.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Sveučilište Sjever, Koprivnica
Citiraj ovu publikaciju:
Časopis indeksira:
- Scopus
Uključenost u ostale bibliografske baze podataka::
- Compendex [formerly Ei] (Elsevier)
- cnpLINKer (CNPIEC)
- Google Scholar
- Inspec (Institution of Engineering and Technology)